Tamiya CC-02 Upgrade Front Knuckle Arms Aluminium JR-CC200-S by Jazrider  [JR-CC200-S]

Tamiya CC-02 Chassis Aluminum Front Knuckle Arms (Silver)
Price:
AUD$15.60
Brand:
JAZRIDER
Model:
JR-CC200-S
Condition:
Brand New
Write a review

Front knuckle arms, aluminium, for CC-02

This RC-scale front knuckle arm set is engineered for the Tamiya CC-02 chassis and listed as JR-CC200-S. Aluminium construction replaces the stock plastic knuckles to firm steering input and extend service life in scale off-road applications.

Compatibility is centred on the CC-02 steering assembly; confirm your hub spacing and kingpin arrangement match CC-02 specs before fitting. Installation normally swaps the factory knuckles without chassis cutting, but always verify tolerances and re-tighten linkages following initial use to prevent binding.

From a tuning perspective, these knuckles increase steering stiffness and feedback. Reduced spindle flex will change turn-in and caster sensations, so make small adjustments and test on your current tyre and suspension combination. This product description applies solely to RC-scale parts.

Will stiffer knuckles improve cornering precision?

Stiffer knuckles reduce flex at the spindle, which can sharpen turn-in and make steering feel more direct; balance this against tyre grip and suspension compliance.

Should I change other setup items after fitting these?

You may need to tweak toe, camber or steering link lengths to regain desired handling as the knuckles alter feedback and stiffness. Make incremental changes and test progressively.

Are there tuning tips for mixed terrain?

For mixed trail and hardpack, start with conservative stiffness then increase as you evaluate corner behavior; tyres and shock tuning often have a bigger effect than the knuckles alone.

Copyright © 2008-2026 rcjaz.com.au All rights reserved