TAMIYA DT-04 Tuned Rear Hub Stub Carriers 7075-T6 Oversize Bearings DT4022 by GPM  [DT4022]

TAMIYA DT-04 RC FIGHTER NXGEN 7075-T6 Alloy Rear Hub Stub Carriers With Oversize Bearing - GPM DT4022
Price:
AUD$24.19
Brand:
GPM
Model:
DT4022
GTIN:
4894538407136
Condition:
Brand New
Write a review
alt="TAMIYA DT-04 RC FIGHTER NXGEN 7075-T6 Alloy Rear Hub Stub Carriers With Oversize Bearing - GPM DT4022" title="TAMIYA DT-04 RC FIGHTER NXGEN 7075-T6 Alloy Rear Hub Stub Carriers With Oversize Bearing - GPM DT4022"
alt="TAMIYA DT-04 RC FIGHTER NXGEN 7075-T6 Alloy Rear Hub Stub Carriers With Oversize Bearing - GPM DT4022" title="TAMIYA DT-04 RC FIGHTER NXGEN 7075-T6 Alloy Rear Hub Stub Carriers With Oversize Bearing - GPM DT4022"
alt="TAMIYA DT-04 RC FIGHTER NXGEN 7075-T6 Alloy Rear Hub Stub Carriers With Oversize Bearing - GPM DT4022" title="TAMIYA DT-04 RC FIGHTER NXGEN 7075-T6 Alloy Rear Hub Stub Carriers With Oversize Bearing - GPM DT4022"
alt="TAMIYA DT-04 RC FIGHTER NXGEN 7075-T6 Alloy Rear Hub Stub Carriers With Oversize Bearing - GPM DT4022" title="TAMIYA DT-04 RC FIGHTER NXGEN 7075-T6 Alloy Rear Hub Stub Carriers With Oversize Bearing - GPM DT4022"

Upgraded rear hub stubs for DT-04

Replace the factory rear hub stub carriers on TAMIYA DT-04 RC FIGHTER NXGEN models with precision 7075-T6 aluminium carriers that accept oversized bearings to cut play and improve rear steering precision for 1/10 scale setups.

Carriers are supplied anodized in chosen colours and include oversized bearings to enhance alignment and longevity versus stock inserts. The small components are pre-assembled so the swap is quicker and cleaner.

Fit instructions: remove stock carriers, transfer any required seals or spacers, fit the supplied oversized bearings and stainless washers, then secure with the provided hardware using a medium-strength thread locker to prevent loosening under running conditions.

Packing includes

  • Rear Hub Stub Carriers - 2pcs
  • Oversized Bearing 5x13x5 - 2pcs
  • Oversized Bearing 5x12x4 - 2pcs
  • Stainless Steel Washer 5x8x0.5 - 4pcs

Compatible Models

  • TAMIYA 1/10 DT-04 RC FIGHTER NXGEN-58741

A direct-fit upgrade that strengthens hub support for crisper rear-end response while keeping the suspension and drivetrain layout intact.

Will these reduce steering slop?

Yes, tighter bearing fitment and stiffer aluminium carriers reduce slop at the hub, giving a more precise steering feel.

Are seals and spacers reused?

Transfer any original seals or spacers as required; the kit supplies bearings and washers but assumes the existing seals will be reused where applicable.

Do these need re-torquing after a break-in period?

Check fastener torque after the first running session and periodically thereafter; use medium-strength thread locker to maintain clamp.

Can I use these on other Tamiya models?

They are designed for the listed DT-04 model; verify compatibility against the vehicle mounting points before fitting to other chassis.

Copyright © 2008-2026 rcjaz.com.au All rights reserved