Tamiya F103RM Racing Graphite Lower Deck F103RM-05 by 3Racing  [F103RM-05]

Tamiya F103RM Graphite Lower Deck - 3RACING F103RM-05
Price:
AUD$32.63
Brand:
3Racing
Model:
F103RM-05
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Performance graphite lower deck for F103RM

This F103RM-05 graphite lower deck is a direct hop-up intended for the Tamiya F103RM racing chassis. Fitted as a replacement lower deck, it concentrates on increasing chassis stiffness and delivering repeatable feedback while setting up on the track. It is supplied as a tuning component, not a full chassis assembly.

The design mates to the F103RM mounting locations and acts as the main structural base for the chassis stack. By altering torsional stiffness the deck lets racers fine-tune balance and corner response through suspension geometry and weight placement changes.

Installation notes: the deck replaces the original lower deck without major changes to other components, and stock hardware is commonly reused. Always inspect mount alignment and clearance during initial assembly.

Specifications

  • Item: Graphite lower deck
  • Material: Graphite
  • Model Number: F103RM-05
  • Compatibility: F103RM

For racers aiming for a firmer handling baseline on the Tamiya F103RM, this graphite lower deck is an effective tuning upgrade; adjust setups in small steps to find the right balance.

Yes, most installations use the original screws and spacers from the stock lower deck, but verify each fastener during fit-up.
Increasing torsional stiffness can reduce chassis roll and sharpen response, which may require spring or anti-roll adjustments.
Yes, it is intended for track use where consistent chassis feedback helps with setup development.
Keep mounting surfaces clean and inspect for cracks after heavy impacts; graphite is stiff but can be brittle under severe loads.

Copyright © 2008-2026 rcjaz.com.au All rights reserved