Tamiya GF01 38mm #45 Steel Front/Rear CVD Shafts with 12x6mm Hex GF1238SADT by GPM  [GF1238SADT]

Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT
Price:
AUD$28.48
Brand:
GPM
Model:
GF1238SADT
GTIN:
4894538035407
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT" title="Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT"
alt="Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT" title="Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT"
alt="Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT" title="Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT"
alt="Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT" title="Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT"
alt="Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT" title="Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT"
alt="Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT" title="Tamiya GF01 Steel #45 Front/Rear CVD Shaft (38mm) With 12x6mm Hex Adapters - 1pr set - GPM GF1238SADT"

GF01 38mm CVD shaft summary

These front and rear CVD shafts are an aftermarket steel option for the Tamiya GF01 platform, intended as a direct-fit upgrade over softer factory drives. Fabricated from #45 steel at a 38mm length, the kit includes 12x6mm hex adapters to suit common GF01 wheel hubs.

The shafts retain standard GF01 mounting geometry while improving torsional stiffness and durability compared with plastic or lower-grade metal parts. They are aimed at 1/10 scale touring and off-road GF01 models that match the specified length and hex adapter size.

Fitment checklist: ensure your vehicle uses the GF01 standard CVD length and 12x6mm hex wheel interface, inspect pin retention and bearing fit during installation, and run a slow-speed check after fitting to confirm smooth operation.

Specifications

  • Item: Front/Rear CVD shaft set
  • Material: Steel #45
  • Model Number: GF1238SADT
  • Compatibility: Tamiya GF01
  • Length: 38mm
  • Includes: 12x6mm hex adapters
  • Quantity: 1 pr set

A no-frills steel replacement aimed at GF01 users who want reliable, direct-fit shafts with 12x6mm hex compatibility; always double-check measurements on your GF01 variant before extended use.

Do these require any modification to wheel hubs?

No hub modification should be needed if your vehicle uses the GF01 standard 12x6mm hex mounts and 38mm CVD length; otherwise check clearances and measurements first.

Is the material hardened steel?

The shafts are specified as #45 steel which provides higher rigidity than typical plastics; specific heat treatment is not listed so treat as standard steel hardware and inspect for wear.

Will these affect handling?

Stiffer steel shafts can alter drivetrain feedback under load but should not change wheel alignment or geometry; monitor drivetrain components for increased wear after conversion.

What is shipped in the package?

The shipment includes the front and rear 38mm steel CVD shafts and matching 12x6mm hex adapters as listed; confirm items on receipt match the specification list.

Copyright © 2008-2026 rcjaz.com.au All rights reserved