Tamiya GF01 Steering King Pin 5mmx6.2mm XM4 4pcs GF004SB by GPM  [GF004SB]

Tamiya GF01 Steel King Pin (5mmx6.2mmXM4) - 4pcs (For GF01 / TA01 / TA02 / TA03 / TL01) - GPM GF004SB
Price:
AUD$2.72
Brand:
GPM
Model:
GF004SB
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Heavy-duty king pins for GF01 and related chassis

This aftermarket king pin kit is intended for Tamiya GF01-based cars and offers a steel replacement to restore worn steering pivot points on 1/10 scale RC vehicles. The package contains 4pcs at the sized 5mmx6.2mm XM4 as shown in the product title, to re-establish secure pivot connection where stock pins have failed.

Use guidance: install these pins at steering knuckles and suspension pivot junctions on compatible Tamiya platforms to regain firm steering feel. Before fitting, assess mating bores and fasteners for wear and ensure pins are fully seated to avoid steering lash.

Service tips: inspect knuckle bores and related bearings, check for smooth rotation without binding after installation, and replace any worn companion hardware. These components are supplied for model-level repair and performance tuning.

Compatible Models

  • GF01
  • TA01
  • TA02
  • TA03
  • TL01

Are these suitable for off-road use?

Yes, the steel construction is chosen for durability under load, but check surrounding components for wear to ensure reliable performance off-road.

Will they cause binding if oversized?

If bores are worn undersize or the pin is a tight fit, you may see binding. Clean and measure bores and use correct seating to prevent interference.

Can I reuse original hardware?

Reuse only if fasteners and threads are in good condition; replace any items that show corrosion or thread damage to ensure a secure assembly.

Copyright © 2008-2026 rcjaz.com.au All rights reserved