Included is an aluminium hi-torque 25T servo saver plus a set of aluminium tie rods tailored for the 1/10 Tamiya GF-01 chassis. As an aftermarket upgrade it replaces the factory plastic saver plate and linkages to minimise flex and deliver a sharper connection between the servo and steering knuckles while maintaining GF-01 geometry.
Compatibility and scope: the components are intended for GF-01 chassis layouts and GF-01 kit platforms. This is an upgrade kit rather than a universal conversion — check saver mount dimensions and confirm your servo spline count is 25T before purchasing.
Installation pointers: these alloy parts follow the factory mounting points on GF-01 vehicles. Installation generally requires removing the stock saver and tie rods, moving across any needed spacers or washers, and trimming or setting link lengths after centring the servo. Use thread-lock on alloy-to-alloy hardware where applicable.
Tuning impact and maintenance: fitting metal tie rods and a metal saver reduces steering compliance for more immediate input, helpful when dialling in corner entry and steering feel. Regularly inspect rod ends and threads for wear and replace worn ball ends to avoid slack in the steering system.
Copyright © 2008-2026 rcjaz.com.au All rights reserved
