Tamiya M03M Rear Hub Carrier Aluminium 0 Degree Light Blue - M03M-12/0/LB by 3Racing  [M03M-12/0/LB]

Light blue aluminium rear hub for M03M

This aluminium hub carrier is designed to fit the Tamiya M03M chassis and carries the part number M03M-12/0/LB. With a light blue finish, it serves as a replacement/hop-up component to secure the rear hub and suspension on M03M vehicles. The 0 degree design maintains the original hub geometry while upgrading the carrier material.

Function and tuning context: replacing the stock plastic carrier with aluminium provides a firmer mounting surface for the hub and link points, reducing flex and improving repeatable alignment. Because it is a 0 degree unit, it does not intentionally alter toe or camber settings.

Installation guidance: remove the existing rear carrier and transfer the wheel hub, bearings and linkage hardware into the aluminium part, using original screws where appropriate. Check clearance and bearing preload during assembly and confirm there is no interference with drive components. Intended for model use only.