TAMIYA M05 Rear Graphite Shock Tower M05-06/WO - Direct Fit Upgrade by 3Racing  [M05-06/WO]

Tamiya M05 Graphite Rear Shock Tower (M&S) - 3RACING M05-06/WO
Price:
AUD$16.32
Brand:
3Racing
Model:
M05-06/WO
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

M05 rear mount upgrade summary

Built as 3Racing M05-06/WO, this graphite rear shock tower is an RC-scale hop-up for the TAMIYA M05 chassis. It swaps the stock plastic rear shock mount for a stiffer graphite piece to reduce chassis movement at the shock pickup and to deliver cleaner feedback during setup changes.

Installation is aimed at regular hobbyists: remove the original plastic tower, transfer your existing hardware and shock mount pins, and secure the graphite tower to the existing mounting locations. Only common hex drivers are needed and the component is a direct-fit where M05 compatibility is specified.

From a tuning viewpoint, installing a graphite rear tower decreases flex around the shock mount and helps the rear settle more consistently, making adjustments to damping and spring rates more effective across different track conditions.

Can I reuse the stock hardware when fitting this tower?

Yes, the stock screws and shock pins are normally reused when replacing the plastic tower with this graphite unit.

Will the graphite tower change handling significantly?

It firms the shock mount area, giving a firmer rear response; you may need small damping or spring adjustments to regain preferred balance.

Is fitting this suitable for beginners?

Yes, if you are comfortable removing and refitting basic M05 parts it's a straightforward swap, but allow time to re-trim your setup after fitting.

Copyright © 2008-2026 rcjaz.com.au All rights reserved