TAMIYA M-07 Front C-Hub (Aluminum) - JR-M703-LB by Jazrider  [JR-M703-LB]

Tamiya M-07 Aluminum Front C-Hub (Light Blue)
Price:
AUD$12.61AUD$14.84
Brand:
JAZRIDER
Model:
JR-M703-LB
Condition:
Brand New
Available in shop
Write a review

TAMIYA M-07 Steering C-Hub in Aluminum

The JR-M703-LB serves as an aluminum replacement for the front steering knuckle mount on the TAMIYA M-07 chassis, providing a firmer anchor point for the wheel hub and steering linkage than the stock plastic piece. That reduced flex helps preserve the intended steering geometry when tuning.

Fitting is a direct replacement on M-07 setups using the same mounting pattern: remove the factory C-hub, move over the wheel hub, pins, and fasteners, then reassemble. Verify bearing seating and screw torque to ensure stable steering behaviour after installation.

Will this help my on-road setup?

Yes — the stiffer C-hub reduces unwanted movement at the steering pivot, which can make toe and camber settings hold more consistently during cornering and braking.

Any special steps when installing for tuning work?

After installing, check that steering link lengths and pivot points match your tuning plan; small adjustments to servo saver or link positions may be needed to retain original steering geometry.

Does weight change affect handling?

Aluminum adds modest weight compared with plastic, which can slightly alter front-end balance; factor this into spring and damper tuning for best on-road performance.

Copyright © 2008-2026 rcjaz.com.au All rights reserved