TAMIYA M1025 Hummer Front Steering Knuckle Aluminium HM1019 by GPM  [HM1019]

Tamiya M1025 Hummer Aluminium Front C-Hub - 1pr set - GPM HM1019
Price:
AUD$21.02
Brand:
GPM
Model:
HM1019
GTIN:
4894538075472
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Tamiya M1025 Hummer Aluminium Front C-Hub - 1pr set - GPM HM1019" title="Tamiya M1025 Hummer Aluminium Front C-Hub - 1pr set - GPM HM1019"
alt="Tamiya M1025 Hummer Aluminium Front C-Hub - 1pr set - GPM HM1019" title="Tamiya M1025 Hummer Aluminium Front C-Hub - 1pr set - GPM HM1019"
alt="Tamiya M1025 Hummer Aluminium Front C-Hub - 1pr set - GPM HM1019" title="Tamiya M1025 Hummer Aluminium Front C-Hub - 1pr set - GPM HM1019"
alt="Tamiya M1025 Hummer Aluminium Front C-Hub - 1pr set - GPM HM1019" title="Tamiya M1025 Hummer Aluminium Front C-Hub - 1pr set - GPM HM1019"
alt="Tamiya M1025 Hummer Aluminium Front C-Hub - 1pr set - GPM HM1019" title="Tamiya M1025 Hummer Aluminium Front C-Hub - 1pr set - GPM HM1019"
alt="Tamiya M1025 Hummer Aluminium Front C-Hub - 1pr set - GPM HM1019" title="Tamiya M1025 Hummer Aluminium Front C-Hub - 1pr set - GPM HM1019"
alt="Tamiya M1025 Hummer Aluminium Front C-Hub - 1pr set - GPM HM1019" title="Tamiya M1025 Hummer Aluminium Front C-Hub - 1pr set - GPM HM1019"
alt="Tamiya M1025 Hummer Aluminium Front C-Hub - 1pr set - GPM HM1019" title="Tamiya M1025 Hummer Aluminium Front C-Hub - 1pr set - GPM HM1019"

Aluminium steering knuckle for TAMIYA M1025 Hummer

This aluminium front C-hub is supplied as an RC-scale replacement for the TAMIYA M1025 Hummer. It replaces the standard plastic steering knuckle to provide a defined steering pivot and a robust mount for the horn and front wheel hub.

The component is matched left and right and is intended for direct replacement of the stock front C-hubs on the M1025 Hummer. Installation follows normal front axle servicing steps; always confirm wheel alignment and steering geometry after fitting the new hubs.

For setup work this hub is a straightforward durability upgrade, moving steering load points to metal components. Riders should note the steering feedback will firm up compared with plastic parts, and standard maintenance of fasteners and contact areas is advised.

Specifications

  • Item: Aluminium Front C-Hub - 1pr set
  • Material: Aluminium
  • Model Number: HM1019
  • Compatibility: Tamiya M1025 Hummer

HM1019 is a direct-fit aluminium front C-hub for the TAMIYA M1025 Hummer, suited to hobbyists who prefer metal steering components for better wear resistance and steady handling.

Is this a direct swap for the stock hubs?

Yes, the hubs are intended as direct replacements for the original front C-hubs on the M1025 Hummer and should fit without body or chassis modification.

Will aluminium hubs need extra care off road?

Aluminium is durable but should be kept clear of abrasive debris; clean and inspect the mating surfaces after rough runs to prevent accelerated wear on bearings and screws.

Does this require new wheel hexes or bearings?

No additional hexes or bearings are listed; the hubs use the model's existing wheel mounting hardware unless you choose to upgrade those separately.

How often should I check the hub mounting bolts?

Check mounting bolts and bearing fitment after the first few runs and during regular service intervals to ensure nothing has loosened under load.

Copyright © 2008-2026 rcjaz.com.au All rights reserved