Tamiya TA01 / TA02 Front Shock Tower Upgrade — Aluminum JR-TA106-BK by Jazrider  [JR-TA106-BK]

Tamiya TA01 / TA02 Aluminum Front Shock Tower (Black)
Price:
AUD$13.95
Brand:
JAZRIDER
Model:
JR-TA106-BK
Condition:
Brand New
Available in shop
Write a review

Upgrade your TA01/TA02 front suspension

This aluminium front shock tower is an aftermarket upgrade for Tamiya TA01 and TA02 chassis, engineered to provide a firmer anchor for front shocks and camber links so adjustments feel more direct.

Installation uses the stock TA01/TA02 front bulkhead locations and the original shock hole pattern. During fitment, confirm shock shaft alignment and camber link geometry before final torque to keep handling predictable.

By replacing a flexible plastic tower with aluminium, drivers can achieve crisper spring response and more consistent camber behaviour while the black anodized finish offers a measure of corrosion protection for regular outdoor use.

Will this change how the springs feel on the front end?

Yes. The stiffer mounting reduces mounting-area flex, so spring and damper behaviour will translate more directly to chassis response; small setup changes become more measurable.

Do I need to alter camber or toe after fitting?

Minor adjustments may be required to match the firmer geometry; check static camber and toe after installation and make small trimming changes if necessary.

Any recommended setup tips when switching to aluminium?

Start with your previous spring and damper settings, then test for increased responsiveness. You may find slightly softer springs or damper tuning can restore the balance you prefer with the reduced flex.

Copyright © 2008-2026 rcjaz.com.au All rights reserved