TAMIYA TA02T Front Aluminium Suspension Arm - TA2T055 by GPM  [TA2T055]

TAMIYA TA02T Aluminium Front Suspension Arm - 1pr set - GPM TA2T055
Price:
AUD$31.34
Brand:
GPM
Model:
TA2T055
GTIN:
4894538135848
Condition:
Brand New
Write a review
alt="TAMIYA TA02T Aluminium Front Suspension Arm - 1pr set - GPM TA2T055" title="TAMIYA TA02T Aluminium Front Suspension Arm - 1pr set - GPM TA2T055"
alt="TAMIYA TA02T Aluminium Front Suspension Arm - 1pr set - GPM TA2T055" title="TAMIYA TA02T Aluminium Front Suspension Arm - 1pr set - GPM TA2T055"
alt="TAMIYA TA02T Aluminium Front Suspension Arm - 1pr set - GPM TA2T055" title="TAMIYA TA02T Aluminium Front Suspension Arm - 1pr set - GPM TA2T055"
alt="TAMIYA TA02T Aluminium Front Suspension Arm - 1pr set - GPM TA2T055" title="TAMIYA TA02T Aluminium Front Suspension Arm - 1pr set - GPM TA2T055"
alt="TAMIYA TA02T Aluminium Front Suspension Arm - 1pr set - GPM TA2T055" title="TAMIYA TA02T Aluminium Front Suspension Arm - 1pr set - GPM TA2T055"
alt="TAMIYA TA02T Aluminium Front Suspension Arm - 1pr set - GPM TA2T055" title="TAMIYA TA02T Aluminium Front Suspension Arm - 1pr set - GPM TA2T055"

TA02T Front Suspension Arm (Aluminium)

This aftermarket aluminium front suspension arm is designed for the TAMIYA TA02T chassis as a direct replacement for the stock left and right front arms. It restores intended geometry and gives a metal option for those seeking a firmer mounting point for steering and suspension links.

The arm keeps original locating features and fixings so installation follows the usual TA02T front arm removal and refit sequence. Fit the aluminium arms using the supplied hardware, verify link clearance through full travel and then secure fasteners to recommended tightness.

Package contents

  • Stainless Steel Cap Head Screw 3X22.5 - 2pcs
  • Stainless Steel Cap Head Screw 3X28.5 - 2pcs
  • Stainless Steel Button Head Screw 3X10 - 2pcs
  • Collars 4X3X5.2 - 2pcs

Specifications

  • Item: Aluminium front suspension arm, 1pr set
  • Material: Aluminium
  • Model Number: GPM TA2T055
  • Compatibility: TAMIYA TA02T chassis

Use when replacing damaged arms or when a metal upgrade is preferred for consistent front-end geometry. Always recheck steering and suspension movement after fitting.

Can I fit these with stock TA02T hardware?

Yes, the kit supplies the main screws and collars required; these match the stock mounting arrangement.

Is any modification needed for ball studs or links?

No modification should be necessary; check link lengths and ball stud clearance during mock-up to ensure free travel.

Will switching to aluminium cause more wear elsewhere?

Metal arms can transfer loads differently; inspect pivot pins and linkages periodically for signs of increased wear.

How do I check for correct fit?

After installation, cycle the steering and suspension, check for binding, and verify that camber and toe are within your setup targets.

Are the screws rust resistant?

The supplied screws are stainless steel which helps resist corrosion in normal hobby use.

Copyright © 2008-2026 rcjaz.com.au All rights reserved