Tamiya TA05-R TRF415 TRF-416 Touring Bridge Mount Aluminium 415-01/B1C by 3Racing  [415-01/B1C]

Tamiya TA05-R /TRF415 /TRF-416 Aluminium Bridge Suspension Mount - 3Racing 415-01/B1C
Price:
AUD$7.16
Brand:
3Racing
Model:
415-01/B1C
Condition:
Brand New
Write a review

Rigid aluminium bridge mount for touring car use

This aluminium bridge suspension mount is supplied as a replacement for touring chassis that specify TA05-R, TRF415 or TRF-416 compatibility. It replaces the factory plastic bridge with a rigid aluminium component to reduce mounting flex.

Fitting is carried out using the chassis' original fasteners: remove the stock bridge, position the aluminium unit to match the suspension geometry, and refit with the supplied mounting points on the car. No extra hardware is normally required.

For setup work, using an aluminium bridge mount tends to preserve alignment settings under load, aiding predictability when making suspension or alignment changes at the track.

Compatibility List

  • TA05-R
  • TRF415
  • TRF-416

Will this fit without shims or spacers?

Yes, it is designed to match the stock mounting footprint so additional shims are usually not needed for a standard chassis layout.

Does aluminium make the car harsher?

Aluminium reduces local flex rather than changing spring rates; some drivers note a crisper feel, which can help corner entry consistency.

Any torque recommendations?

Tighten to a firm hand torque and avoid over-torquing plastic mating parts; use threadlocker for race use to prevent loosening.

Copyright © 2008-2026 rcjaz.com.au All rights reserved