TAMIYA TA08 PRO Front/Rear CVD Upgrade Hardened #45 TA8044F/RS 4mm by GPM  [TA8044F/RS]

TAMIYA TA08 PRO #45 Harden Steel CVD For Front / Rear - 2pc set - GPM TA8044F/RS
Price:
AUD$28.48
Brand:
GPM
Model:
TA8044F/RS
GTIN:
4894538354362
Condition:
Brand New
Write a review
alt="TAMIYA TA08 PRO #45 Harden Steel CVD For Front / Rear - 2pc set - GPM TA8044F/RS" title="TAMIYA TA08 PRO #45 Harden Steel CVD For Front / Rear - 2pc set - GPM TA8044F/RS"
alt="TAMIYA TA08 PRO #45 Harden Steel CVD For Front / Rear - 2pc set - GPM TA8044F/RS" title="TAMIYA TA08 PRO #45 Harden Steel CVD For Front / Rear - 2pc set - GPM TA8044F/RS"
alt="TAMIYA TA08 PRO #45 Harden Steel CVD For Front / Rear - 2pc set - GPM TA8044F/RS" title="TAMIYA TA08 PRO #45 Harden Steel CVD For Front / Rear - 2pc set - GPM TA8044F/RS"
alt="TAMIYA TA08 PRO #45 Harden Steel CVD For Front / Rear - 2pc set - GPM TA8044F/RS" title="TAMIYA TA08 PRO #45 Harden Steel CVD For Front / Rear - 2pc set - GPM TA8044F/RS"

Hardened front and rear CVD upgrade for TA08 PRO

These aftermarket CVDs are produced for the TAMIYA TA08 PRO chassis as replacements for the factory front and rear CVD parts. Fabricated in hardened steel #45, they are intended to carry drivetrain loads with improved resistance to wear.

The main mechanical change is aimed at reducing joint play: the dogbone size is increased from 3.5mm to 4mm to deliver a firmer connection, while the hardened construction helps maintain reliable wheel rotation under load.

Fitment advice: the components are designed to fit into the TA08 PRO front and rear CVD assemblies and use standard mounting points and hardware. Confirm interaction with your current diff cups and pins during test assembly.

Packing includes

  • CVD - 2pcs

Original Name / Part No:

MC11+MC16+MC8+MC15

Specifications

  • Item Hardened steel CVD for front and rear
  • Material Hardened steel #45
  • Model Number TA8044F/RS
  • Compatibility TAMIYA TA08 PRO front/rear CVD area
  • Includes CVD - 2pcs
  • Dogbone Diameter 4mm, increased from 3.5mm

For modelers tuning or repairing a TA08 PRO, these hardened #45 CVDs are a direct-fit option designed to firm up the driveline and resist wear in front and rear locations.

Can I use these with stock axles?

They are made to fit the stock CVD assemblies on the TA08 PRO, but always check your axle and cup condition for proper clearance.

Do these require special tools to fit?

No special tools are needed beyond typical RC assembly tools, though a careful trial fit is recommended to ensure no interference.

Will these change handling?

They tighten up drivetrain feedback by reducing play, which can make throttle response feel more direct under acceleration.

What is included in the box?

The kit ships with two CVD pieces intended for front and rear installation.

Copyright © 2008-2026 rcjaz.com.au All rights reserved