TAMIYA TT01 Front Alloy Stiffener Bumper 3mm TT220 by GPM  [TT220]

Tamiya TT01 /Tt-01d Alloy Front Bumper Thick 3mm With Screws - GPM TT220
Price:
AUD$6.40
Brand:
GPM
Model:
TT220
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Tamiya TT01 /Tt-01d Alloy Front Bumper Thick 3mm With Screws - GPM TT220" title="Tamiya TT01 /Tt-01d Alloy Front Bumper Thick 3mm With Screws - GPM TT220"

Front-end alloy bumper for TT01 series

This 3mm alloy front bumper is an aftermarket replacement for TAMIYA TT01 and TT-01d that is supplied with mounting screws. It attaches to the stock front mounting points to increase front-end stiffness and provide limited protection against minor on-road contacts.

By reducing front flex under braking and during cornering loads, the thicker alloy can change steering feel and handling balance on tuned TT01 cars. The part is aimed at hobbyist tuning and repair rather than heavy impact protection or non-RC use.

Installation guidance: it mounts to the TT01 front locations and includes screws. Verify fit and clearance with your existing front mounts before fully tightening to prevent any chassis binding.

Is this a direct swap for stock bumpers?

Yes, it is intended to replace the stock front bumper on TT01 and TT-01d using the factory front mounting points.

Does the package include fasteners?

The bumper is supplied with the mounting screws required for attachment to the TT01 front mounts.

Will this hold up to rough use?

It offers limited protection for minor impacts and improves stiffness, but it is not designed for sustained heavy impacts or non-RC applications.

Copyright © 2008-2026 rcjaz.com.au All rights reserved