Tamiya TT-01 Upper Bumper Replacement Graphite 2.5mm GTT220 by GPM  [GTT220]

Tamiya TT01 Graphite Thick 2.5mm Upper Bumper - GPM GTT220
Price:
AUD$17.86
Brand:
GPM
Model:
GTT220
GTIN:
4894538073096
Condition:
Brand New
Write a review
alt="Tamiya TT01 Graphite Thick 2.5mm Upper Bumper - GPM GTT220" title="Tamiya TT01 Graphite Thick 2.5mm Upper Bumper - GPM GTT220"

Replacement graphite upper bumper for TT-01

This is a replacement upper bumper made for the Tamiya TT-01 chassis and identified as model GTT220. Fabricated from 2.5mm graphite, it gives a firmer mount than stock plastic components to strengthen the front end.

Choose this component when tuning for sharper front-end feedback or when swapping out a damaged factory upper bumper. The graphite construction balances low mass with increased stiffness to refine front support without major weight gain.

The part installs using the TT-01 upper bumper mounting pattern and replaces the original bumper at the same location, using the existing chassis fasteners. Confirm your TT-01 variant and mounting hardware before fitting the GTT220 to ensure correct alignment.

Do I need new screws to fit it?

Most installations reuse the original TT-01 screws, but inspect threads and lengths; replace damaged fasteners as needed for safe mounting.

Will this affect cornering balance?

By stiffening the front mount area, the bumper can alter initial turn-in feel; treat it as part of an overall setup and adjust suspension settings accordingly.

Is finishing required after fitting?

Edges are typically finished from manufacturing, but you may lightly deburr mounting holes to ensure clean fit and avoid stress concentrations.

Copyright © 2008-2026 rcjaz.com.au All rights reserved