Tamiya TT01 Universal Swing Shaft STT233 33mm by GPM  [STT233]

Tamiya TT01 Steel Universal Swing Shaft (33mm) With Shims - GPM STT233
Price:
AUD$27.05
Brand:
GPM
Model:
STT233
GTIN:
4894538168563
Condition:
Brand New
Write a review
alt="Tamiya TT01 Steel Universal Swing Shaft (33mm) With Shims - GPM STT233" title="Tamiya TT01 Steel Universal Swing Shaft (33mm) With Shims - GPM STT233"

TT01 driveline swing shaft 33mm steel

The 33mm universal swing shaft is a steel aftermarket replacement engineered for use with the Tamiya TT01 chassis. It serves as a drop-in driveline component to replace damaged or tired shafts in the TT01 transmission and coupling assemblies.

Steel composition provides improved rigidity over softer stock parts, aiding driveline alignment and reducing unwanted flex during setup and moderate upgrades. Installing the part requires access to the driveshaft area and verification of shim and bearing clearances to ensure smooth operation.

Specifications

  • Item: Universal swing shaft
  • Material: Steel
  • Model Number: STT233
  • Compatibility: Tamiya TT01

Ideal for replacing worn TT01 driveshaft parts or when adjusting driveline geometry; always verify shim placement and bearing health during installation.

Will this fit modified TT01 setups?

It fits standard mounting interfaces, but heavily modified or extended drivelines should be measured to confirm compatibility.

Any lubrication advice?

Use light bearing grease where appropriate and avoid excess that could attract debris; keep mating parts clean for long service life.

How to check endplay?

After assembly, rotate the shaft by hand and feel for lateral movement; adjust shims until the shaft spins freely without side-to-side slop.

Is steel better than stock for longevity?

Steel typically provides improved wear resistance and stiffness, but consider the whole driveline when upgrading to avoid shifting stresses.

Copyright © 2008-2026 rcjaz.com.au All rights reserved