TAMIYA TT-02B Front Suspension Aluminum Arms Upgrade JR-TT2B04-GU by Jazrider  [JR-TT2B04-GU]

Tamiya TT-02B Aluminum Front Suspension Arms Set (Gun Metal)
Price:
AUD$17.62
Brand:
JAZRIDER
Model:
JR-TT2B04-GU
Condition:
Brand New
Write a review

Upgraded gun metal front arms for TT-02B

This RC-scale front suspension arms set is made for the TAMIYA TT-02B chassis and is supplied as model JR-TT2B04-GU. The gun metal aluminum components act as a direct replacement for stock arms and provide a firmer mounting point to influence handling.

Fitment concentrates on the TT-02B front geometry. Installation reuses the factory mounting locations and typically involves swapping out the stock parts and securing the aluminum arms with the original pins and screws. Confirm clearance around steering link and servo routes to avoid contact.

For tuning the stiffer arms change how the front end transfers load; expect differences in steering responsiveness and suspension motion. Adjust toe, camber, and damping to dial in the desired balance on your setup runs.

How should I change setup after fitting these arms?

Start with small adjustments: reduce front camber slightly and tweak toe settings, then adapt shock damping to counter the increased front stiffness until handling feels balanced.

Will these make the car understeer or oversteer?

Raising front stiffness tends to reduce compliance and can shift turn-in behavior; whether that produces understeer or oversteer depends on your overall setup, so tune incrementally.

Are these suitable for competitive tuning?

Yes. The consistent geometry and reduced flex give repeatable handling changes that are useful when refining a competitive setup.

Copyright © 2008-2026 rcjaz.com.au All rights reserved