TAMIYA TT-02B/DF-02 Front C-Hub for Performance Tuning - JR-TT2B02-RD by Jazrider  [JR-TT2B02-RD]

Tamiya TT-02B / DF-02 Aluminum Front C-Hub (Red)
Price:
AUD$15.96
Brand:
JAZRIDER
Model:
JR-TT2B02-RD
Condition:
Brand New
Write a review

Performance tuning C-hub for TT-02B and DF-02

This aluminium front C-hub is an RC-scale upgrade part for TAMIYA TT-02B and DF-02 chassis. Precision machined and anodized red, it replaces the standard plastic hub to provide a stiffer interface for the front suspension and steering knuckle.

Fitment uses the stock TT-02B and DF-02 mounting pattern and hardware. When installing, verify steering arm clearance, wheel offset and correct bearing seating to prevent binding and preserve neutral steering characteristics.

For handling the increased stiffness reduces flex at the hub area, making steering inputs more consistent during braking and corner entry. It is ideal for tuners adjusting toe, caster and steering response on 1/10 on-road cars.

Will this change steering response when tuning my setup?

Yes. The extra stiffness reduces compliance at the hub and makes steering feel sharper; you may need to fine tune toe and caster to suit the new response.

Does the C-hub affect suspension damping or spring choice?

It primarily affects hub stiffness rather than spring rates, but you might adjust damping to match the crisper steering and maintain chassis balance.

Any special installation hints for optimised handling?

Ensure bearings are fully seated, check wheel offset for clearance, and test incremental changes on the track to dial in the handling after fitting the metal hub.

Copyright © 2008-2026 rcjaz.com.au All rights reserved