Team Losi SUPER BAJA REY Servo Mounting Plate SB024 by GPM  [SB024]

Rigid servo mounting plate for Super Baja Rey

This 11pcs aluminum servo mount set is made to suit Team Losi SUPER BAJA REY fitments, giving a strong mounting point between the main chassis and sub chassis. The package pairs a machined aluminium plate with stainless fasteners to replace the factory hardware and reduce servo mount flex.

The kit is designed to stabilise the servo and pass steering loads cleanly into the chassis assembly. When installed correctly it limits unwanted servo movement under load, aiding consistent steering response and keeping servo trim intact during demanding driving or landings on the Super Baja Rey platform. Manual reference: LOS251059.

Fitment tips: position the mount so screw holes line up with the chassis bosses, hand-start screws to confirm alignment, and tighten progressively to avoid binding. Check spline engagement and horn orientation before final torque. Bear in mind the aluminium plate will alter stiffness locally, so check component clearances after fitting.

A simple aluminium upgrade to firm up servo mounting on the Super Baja Rey chassis, supplied with stainless hardware for a direct swap.