TEAMPOWERS TP-PG6429 29T 64P Hard-Coated Pinion Gear  [TP-PG6429]

TEAMPOWERS Hard-Coated 64P Pinion Gear , 29T (TP-PG6429)
Price:
AUD$8.26
Brand:
Team Powers
Model:
TP-PG6429
Condition:
Brand New
Write a review

TEAMPOWERS TP-PG6429 Gear Overview

The TEAMPOWERS 64P Hard-Coated Pinion Gear, 29T, offers robust tooth geometry for reliable power transfer. It is aimed at builders who value consistent engagement and longer service life from small drivetrain parts.

Durable Tooth Profile

With a hard coat applied to the contact surfaces, this pinion is less prone to rapid wear and keeps a true profile under load. The 64-pitch layout promotes smooth operation and lowers the chance of premature degradation.

Application and Flexibility

The 29T pinion suits models that run 64P gearing and provides a straightforward option for changing final drive characteristics. It is useful whether you are tuning for quicker acceleration or a higher top speed.

Will this pinion fit a 1/10 scale motor?

Many 1/10 scale motors use 64P pinions, but you should measure the shaft and confirm the set screw position before installing the TP-PG6429.

Do I need special tools to install it?

Basic tools for pinion fitting are sufficient - a small hex driver and a feeler gauge for mesh checks. A proper torque on set screws helps prevent slippage.

How should I set gear mesh with this pinion?

Use a shim or paper method to get a small clearance between teeth, then tighten the pinion and recheck after a short run to account for seating.

Copyright © 2008-2025 rcjaz.com.au All rights reserved