TEAMPOWERS TP-TTF-PM5401R 40x40x10 High Air Flow Fan 20000rpm - Off-road and Track Cooling  [TP-TTF-PM5401R]

TEAMPOWERS High Air Flow Cooling Fan, 40x40x10, 20000rpm@8.4V (TP-TTF-PM5401R)
Price:
AUD$13.78
Brand:
Team Powers
Model:
TP-TTF-PM5401R
Condition:
Brand New
Available in shop
Write a review

Effective Thermal Control for RC Electronics

Preventing overheating is key to consistent performance. The TEAMPOWERS TP-TTF-PM5401R High Air Flow Cooling Fan supplies strong airflow to motor and ESC areas so components stay within safe operating temperatures during heavy use.

Tiny Footprint, High RPM Performance

Measuring 40 x 40 x 10mm, this fan suits compact installations and tight fairings. At 8.4V it can reach about 20000rpm and delivers around 14 grams of thrust for direct cooling on critical parts.

Sturdy Bearings and Wide Voltage Range

The ball bearing design helps the fan run smoothly with extended life expectancy. It accepts voltages from 5V up to 8.4V, giving flexibility to tune fan speed to match your power system.

Specifications

  • Dimensions: 40mm x 40mm x 10mm
  • Revolution: 12000rpm @5V, 20000rpm @8.4V
  • Supply Voltage: 5V~8.4V
  • System: Ball Bearing
  • Thrust: ~14 grams at 8.4V

A compact, reliable fan for hobbyists wanting effective spot cooling. The TEAMPOWERS TP-TTF-PM5401R is a sensible upgrade for race and trail rigs where space is limited.

How should I mount the fan for best results?

Mount directly over the component needing cooling, such as the ESC heat sink or motor can. Use short cables and secure the fan to avoid vibration transfer.

Does running at 8.4V risk damaging the fan?

The fan is rated to 8.4V, which gives maximum RPM. Avoid voltages above 8.4V and check the fan temperature after extended runs to ensure safe operation.

Can I replace the fan if the bearing fails?

Yes. Ball bearing failures typically present as noise or wobble. Replace with an equivalent 40x40x10 ball bearing fan to restore reliable cooling.

Copyright © 2008-2026 rcjaz.com.au All rights reserved