TEAMPOWERS XPS/Sport-V2.0-c 95A 1/10 Brushless Controller  [TP-XPS/Sport-V2.0-c]

TEAMPOWERS XPS Sport V2 (95A) Speed Control (TP-XPS/Sport-V2.0-c)
Price:
AUD$0.00
Brand:
Team Powers
Model:
TP-XPS/Sport-V2.0-c
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="TEAMPOWERS XPS Sport V2 (95A) Speed Control (TP-XPS/Sport-V2.0-c)" title="TEAMPOWERS XPS Sport V2 (95A) Speed Control (TP-XPS/Sport-V2.0-c)"
alt="TEAMPOWERS XPS Sport V2 (95A) Speed Control (TP-XPS/Sport-V2.0-c)" title="TEAMPOWERS XPS Sport V2 (95A) Speed Control (TP-XPS/Sport-V2.0-c)"

Race-Ready Control with TEAMPOWERS XPS/Sport-V2.0-c

The TEAMPOWERS XPS/Sport-V2.0-c is a 95A ESC tailored for 1/10 scale RC cars that need predictable throttle and brake feel. Supporting both sensored and sensorless brushless setups, it is aimed at hobbyists who like to fine tune motor response. Built-in data capabilities and HotWire PC programming give you the tools to optimise settings track-side.

Hardware Sharing and Firmware Compatibility

This controller shares its hardware platform with the Radon V2.0 series while using a durable plastic housing for day-to-day use. Its firmware, PC software and LCD program card maintain compatibility with Radon V2.0, which simplifies firmware updates and accessory use.

Specifications

  • Controls: Forward/Brake/Reverse
  • Input Voltage: 2S-3S LiPo
  • BEC: 6V/3A
  • Motor Limit: 6.5T or over
  • Max Current: ~95A per phase
  • Size: ~41x31x20mm
  • Weight: ~42g

Built-In Safeguards and Quick Setup

The XPS/Sport-V2.0-c features a one-touch On/Off switch with LEDs for status feedback. Protective measures including low-voltage cutoff, thermal shutdown and signal-loss safety are included to guard your system. For rapid adjustments the LED programming card is supplied with the unit.

A solid pick for hobby racers who want a programmable ESC with dependable protections and easy tuning workflows.

Use 2S or 3S LiPo packs as specified. Ensure connectors and wiring are rated for the current to avoid voltage drop and heat.
Sensorless motors should be set to sensorless mode. Attempting sensored timing without the proper sensor connections will not provide the intended control.
Yes, the unit includes overheat protection which reduces performance or shuts down to prevent damage if temperatures get too high.

Copyright © 2008-2025 rcjaz.com.au All rights reserved