Titanium M4 Wheel Nut Upgrade (2) Arrowmax AM-030003  [AM-030003]

Arrowmax AM-030003 Titanium Wheel Nuts M4 (2)
Price:
AUD$6.80
Brand:
Arrowmax
Model:
AM-030003
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Fitment and Tuning Notes

This Arrowmax AM-030003 item is an RC-scale wheel fastening accessory supplied as 2 pcs of M4 threaded titanium wheel nuts. They fit RC vehicles that accept M4 wheel fasteners and are commonly chosen to replace steel nuts for weight and service reasons.

Installation notes: confirm your hub or wheel uses an M4 thread, clear any debris from mating threads, seat the nut solidly against the wheel or adapter, and tighten to a firm feel without over-torquing; re-check after the first session. These nuts are intended for regular maintenance and tuning work where consistent clamping is required.

Tuning impact: changing to titanium M4 nuts can influence pit service speed and vibration response of the wheel assembly; check thread condition and nut seating during setup and after any heavy running.

Will switching to titanium change handling?

Any weight change at the wheel can subtly affect unsprung mass and vibration behaviour; monitor handling after the swap and adjust setup as needed.

Do these nuts affect pit service procedures?

Titanium nuts may require the same care when tightening, but technicians should note any difference in feel and re-check wheel security after service.

Should I change setup after fitting them?

Track testing is recommended; if vibration or wheel behaviour changes, tune damping or check wheel balance and seating.

Copyright © 2008-2026 rcjaz.com.au All rights reserved