Track and Trail Tamiya 54992 CC-02 Aluminum Damper Spring Set OP-1992  [54992]

Tamiya 54992 - CC-02 Aluminum Damper Spring Set OP-1992
Price:
AUD$20.05
Brand:
Tamiya
Model:
54992
GTIN:
4950344549924
Condition:
Brand New
Available in shop
Write a review

Get dialled with the Tamiya 54992 CC-02 Aluminum Damper Spring Set OP-1992

The Tamiya 54992 CC-02 Aluminum Damper Spring Set is intended to complement the aluminium dampers sold as Item 54991. It contains three spring rates - soft, medium and hard - so you can customise handling for different track surfaces. Colour tags make each rate obvious: red = soft, yellow = medium, blue = hard.

Compact springs optimised for CC-02 setups

These slim springs plug into the CC-02 chassis in combination with Item 54991 dampers. They measure 12.6mm inner diameter and 50mm in length, enabling fine adjustments to balance and roll control. Opt for softer springs on loose ground and harder springs for firm, high-speed circuits.

Basic shock tools or a small set of pliers and a screwdriver are usually enough. Remove the damper cap and piston rod to release the spring, then slide the new spring into place before reassembling.
These springs are specified with a 12.6mm inner diameter and a 50mm length. Check these measurements against any non-Tamiya dampers before attempting to fit them.
Start with the medium (yellow) springs for a balanced setup on mixed surfaces, then tweak to soft (red) for rougher sections or hard (blue) for fast, smooth stretches.

Copyright © 2008-2026 rcjaz.com.au All rights reserved