TRAXXAS Latrax Rally Wheel Hex Adapter +3mm LTX010D/+3MM by GPM  [LTX010D/+3MM]

Hex spacer for 1/18 Latrax Rally hubs

This aluminium hex spacer is an aftermarket pair supplied for the TRAXXAS 1/18 Latrax Rally platform. It acts as a hub-mounted spacer that pushes the brake disk and wheel assembly outward by +3mm to modify stance and clearance.

The part is useful when you want a slight increase in track or need to correct disk interference with bodywork or suspension parts. Aluminium construction maintains alignment accuracy and reduces wear from frequent wheel fitting.

To install, remove the stock hex, place the adapter on the hub, and reinstall the wheel so the disk and wheel are correctly positioned. Always check that the hex seats flush and that fasteners engage cleanly to prevent stripping threads.

From a setup perspective, adding +3mm is a modest tuning step that can change leverage and clearance enough to help tight layouts. Consider it for small, deliberate adjustments to your vehicle geometry.