TRAXXAS E-REVO Compact Aluminium Wheel Hex Claw +2mm ER0062MM/4 by GPM  [ER0062MM/4]

Aluminium wheel hex claw for E-REVO hubs

This aluminium wheel hex claw set serves as an aftermarket replacement for TRAXXAS E-REVO wheel mounting components. With a +2mm offset and an integrated brake disk, it helps stabilise wheel seating and reduce slippage under torque.

Installation requires basic wheel disassembly: remove the stock hex, fit the aluminium claw onto the hub and secure using the original hex screw arrangement. Because the hex increases offset by +2mm, verify clearance at suspension links and the body before final tightening. Consider threadlocker on fasteners for models exposed to heavy loads and confirm wheel runout after installation.

In setup work these aluminium claws act as a stiffer interface than many plastic hexes, lowering relative movement that can cause the wheel to slip. They are well suited to consistent brake setup and higher torque motor/ESC combinations during club sessions or practice runs.

This ER0062MM/4 aluminium set from GPM provides a reliable wheel mounting upgrade for E-REVO models, offering +2mm offset and a brake disk to help maintain wheel position and reduce slipping.