TRAXXAS Rear Gear Replacement 56T Spur + 15T Pinion SSLA2W1556T by GPM  [SSLA2W1556T]

TRAXXAS FORD F-150 SVT RAPTOR OBA Carbon Steel Spur Gear(56T)+ Pinion Gear(15T) - 6pc set - GPM SSLA2W1556T
Price:
AUD$32.69
Brand:
GPM
Model:
SSLA2W1556T
GTIN:
4894538365832
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="TRAXXAS FORD F-150 SVT RAPTOR OBA Carbon Steel Spur Gear(56T)+ Pinion Gear(15T) - 6pc set - GPM SSLA2W1556T" title="TRAXXAS FORD F-150 SVT RAPTOR OBA Carbon Steel Spur Gear(56T)+ Pinion Gear(15T) - 6pc set - GPM SSLA2W1556T"
TRAXXAS Rear Gear Replacement Spur 56T + Pinion 15T SSLA2W1556T

Rear gearbox spur and pinion description

This six piece carbon steel gear kit is intended as a replacement for the rear gearbox used on compatible TRAXXAS 1/10 2WD vehicles. Core components are a 56T spur and a 15T pinion, with the pinion noted as corresponding to TRX4015T for shaft fit checks.

The assortment is suitable for gear maintenance or ratio swaps during tuning. Ensure correct mesh setup, axial alignment and the use of the included screw and three stainless washers to achieve reliable power transfer and minimise wear.

Packing includes

  • Spur Gear 56T - 1pcs
  • Pinion Gear 15T - 1pcs
  • 3*3 Screw Shaft - 1pcs
  • Stainless Steel Washer 3*7*0.2 - 3pcs

Original Name / Part No:

4690,4683,4686

Compatible Models

  • TRAXXAS-1/10 ELECTRIC 2WD F-150 SVT RAPTOR-58064-2
  • TRAXXAS-1/10 2WD BANDIT XL-5 BUGGY-24054-1
  • TRAXXAS-1/10 2WD BANDIT XL-5 BUGGY-24054-61
  • TRAXXAS-1/10 2WD BANDIT XL-5 BUGGY-24054-4
  • TRAXXAS-1/10 2WD BANDIT VXL BRUSHLESS BUGGY-24076-74
  • TRAXXAS-1/10 2WD BANDIT VXL BRUSHLESS BUGGY-24076-4
  • TRAXXAS-1/10 2WD SLASH SHORT COURSE TRUCK-58014-4
  • TRAXXAS-1/10 2WD SLASH SHORT COURSE TRUCK-58024
  • TRAXXAS-1/10 2WD SLASH SHORT COURSE TRUCK-58034-1
  • TRAXXAS-1/10 2WD SLASH SHORT COURSE TRUCK-58034-61
  • TRAXXAS-1/10 2WD SLASH VXL SHORT COURSE TRUCK-58076-74
  • TRAXXAS-1/10 2WD SLASH VXL SHORT COURSE TRUCK-58076-4

Install this carbon steel 56T spur and 15T pinion as a direct aftermarket replacement in the listed TRAXXAS rear gearbox applications and verify mesh and fastener security after fitting for smooth drivetrain operation.

Do I need to shim the pinion?

Some models require a small shim adjustment to get ideal tooth contact; fit the gear and test mesh before final tightening.

Will this cope with brushless setups?

Carbon steel gears are robust for many brushless setups, but ensure motor torque and pinion size are matched to your drivetrain to avoid excess wear.

How many parts are in the kit?

The kit contains six items in total: the 56T spur, 15T pinion, one 3x3 screw shaft and three 3x7x0.2 stainless washers as listed in the packing section.

Can I reuse my old hardware?

If screws and washers are undamaged you can reuse them, but the kit includes specific hardware and using the supplied items ensures correct spacing and fit.

Copyright © 2008-2026 rcjaz.com.au All rights reserved