TRAXXAS GT4 TEC 2.0 4WD Precision Hex Adapter 8mm - GT010/12X8MM by GPM  [GT010/12X8MM]

TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 8mm Thick - 12pc set - GPM GT010/12X8MM
Price:
AUD$10.44
Brand:
GPM
Model:
GT010/12X8MM
GTIN:
4894538286052
Condition:
Brand New
Write a review
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 8mm Thick - 12pc set - GPM GT010/12X8MM" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 8mm Thick - 12pc set - GPM GT010/12X8MM"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 8mm Thick - 12pc set - GPM GT010/12X8MM" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 8mm Thick - 12pc set - GPM GT010/12X8MM"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 8mm Thick - 12pc set - GPM GT010/12X8MM" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 8mm Thick - 12pc set - GPM GT010/12X8MM"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 8mm Thick - 12pc set - GPM GT010/12X8MM" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 8mm Thick - 12pc set - GPM GT010/12X8MM"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 8mm Thick - 12pc set - GPM GT010/12X8MM" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 8mm Thick - 12pc set - GPM GT010/12X8MM"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 8mm Thick - 12pc set - GPM GT010/12X8MM" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 8mm Thick - 12pc set - GPM GT010/12X8MM"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 8mm Thick - 12pc set - GPM GT010/12X8MM" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 8mm Thick - 12pc set - GPM GT010/12X8MM"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 8mm Thick - 12pc set - GPM GT010/12X8MM" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Hex Adapters 8mm Thick - 12pc set - GPM GT010/12X8MM"

GT4 hex adapter assembly

This hex adapter assembly is designed for TRAXXAS GT4 TEC 2.0 4WD use to transfer wheel loads securely into the axle hub. The parts are machined from 6061 T6 aluminium and the hex rings are 8mm thick to match common axle-mounted wheel hexes.

The adapter shape provides a tight interface between hex and axle, reducing movement and helping to keep wheel alignment consistent during cornering and tuning. It is intended for RC car axle and wheel connection only, not for use on real vehicles.

The included hardware offers standard mounting: the pack contains 2x10 steel pins and 2x5 stainless steel cap head screws to fasten the adapter to the axle. The hex thickness is 8mm and the original brake disk measures 6.8mm, which may be useful when checking clearance.

Packing includes

  • 2x10 Steel Pin - 4pcs
  • 2x5 Stainless Steel Cap Head Screw - 4pcs

This item is compatible with

  • TRAXXAS FORD GT4-TEC 2.0
  • ELEMENT RC-1/10 ENDURO SENDERO-40100

Can these adapters be used for racing setups?

Yes, the stiff 6061 T6 construction and 8mm thickness suit competitive tuning where reducing wheel play improves handling, provided the adapters match your GT4 hub dimensions.

Will I need spacers or shims?

Some setups may require shimming depending on brake disk and wheel offset; use the listed 6.8mm brake disk thickness as a reference when checking clearance.

Are the fasteners corrosion resistant?

The cap head screws are stainless steel and the steel pins are standard finish; consider replacing pins with stainless options if you need extra corrosion resistance in wet conditions.

Copyright © 2008-2026 rcjaz.com.au All rights reserved