Traxxas GT4 TEC 2.0 Rear Aluminium Arm Upgrade GT056 by GPM  [GT056]

TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056
Price:
AUD$31.34
Brand:
GPM
Model:
GT056
GTIN:
4894538289794
Condition:
Brand New
1 Reviews
Write a review
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056"
alt="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056" title="TRAXXAS 4WD GT4 TEC 2.0 Aluminum Rear Suspension Arms - 4pc set - GPM GT056"

Rear aluminium arms compatible with Traxxas GT4

This GPM GT056 rear arm set is manufactured from 6061 T6 aluminium and fitted with Delrin collars to minimise damper pivot play for more consistent suspension action.

The design includes several shock mounting options so you can tweak roll behaviour and ride height without changing shock bodies. The sculpted machining profile reduces bulk while improving repeatable fitment at the chassis mounts over stamped parts.

Hardware supplied: stainless steel round head screws 3x12, 2pcs, sized for the stock rear fixing points. Perform a trial fit to confirm alignment and free movement before final assembly.

Packing includes

  • Stainless Steel Round Head Screws 3x12 - 2pcs

Compatible Models

  • Traxxas 1:10 4WD FORD GT4 + TEC 2.0 83056-4

Use these arms as a direct rear replacement on supported Traxxas GT4 TEC 2.0 chassis to tighten pivot fitment and test different shock angles while tuning.

 

Product Reviews
1 Reviews
rating
Thank you very much for getting my package out so quickly. Getting it before the holidays is wonderful. Really great job folks. Thanks again. Jeff

What alloy is used for the arms

The arms are made from 6061 T6 aluminium and include Delrin collars to reduce pivot slack and wear.

Are the screws included suitable for stock mounts

Yes, the two supplied stainless steel 3x12 screws are sized for the original mounting holes on the rear suspension.

Will changing shock holes affect handling a lot

Altering shock positions changes leverage and roll centre, which can noticeably affect turn in and midcorner balance depending on other setup choices.

What should I inspect after fitting

Check Delrin collars are seated, verify travel through the full suspension arc, and tighten screws evenly to avoid distortion.

Copyright © 2008-2026 rcjaz.com.au All rights reserved