TRAXXAS HOSS 4X4 VXL Medium Carbon Output Gears FR1200S/G2 by GPM  [FR1200S/G2]

TRAXXAS HOSS 4X4 VXL Medium Carbon Steel Output Gears For The #6780 Center Differential - GPM FR1200S/G2
Price:
AUD$37.45
Brand:
GPM
Model:
FR1200S/G2
Condition:
Brand New
Write a review
alt="TRAXXAS HOSS 4X4 VXL Medium Carbon Steel Output Gears For The #6780 Center Differential - GPM FR1200S/G2" title="TRAXXAS HOSS 4X4 VXL Medium Carbon Steel Output Gears For The #6780 Center Differential - GPM FR1200S/G2"

Scale center differential output gears

The FR1200S/G2 kit provides a pair of replacement output gears for the #6780 center differential found on several TRAXXAS 1/10 4WD chassis. Built from medium carbon steel, these gears are intended for routine rebuilds and scenarios where a metal replacement is preferred to the factory parts.

The set includes two matching output gears sold as a pair, intended for use during differential servicing or when fine tuning gear engagement. These are scale RC components and are not designed for full-size automotive use.

Packing includes

  • Differential output gears - 2pcs

Original Name / Part No:

Part Location:Differential Gear

Compatible Models

  • TRAXXAS-1/10 4WD FORD F-150 RAPTOR R TRUCK-101076-4
  • TRAXXAS-1/10 4WD HOSS 4X4 VXL 3S-90076-4
  • TRAXXAS-1/10 RUSTLER 4X4 VXL-67076-4
  • TRAXXAS-1/10 Stampede 4X4 Brushless -67154-4
  • TRAXXAS-1/10 Rustler 4X4 Brushless -67164-4
  • TRAXXAS-1/10 Rustler 4X4 -67064-1
  • TRAXXAS-1/10 Rustler 4X4 -67064-61
  • TRAXXAS-1/10 Slash 4X4 Ultimate -68077-4
  • TRAXXAS-1/10 Slash 4X4 VXL -68086-4
  • TRAXXAS-1/10 Slash 4X4 -68054-1
  • TRAXXAS-1/10 Slash 4X4 -68054-61
  • TRAXXAS-1/10 Slash 4X4 Brushless -68154-4
  • TRAXXAS-1/10 Slash 4X4 Ultimate -68277-4
  • TRAXXAS-1/10 Slash 4X4 VXL -68286-4
  • TRAXXAS-1/10 Stampede 4X4 VXL -67086-4

Choose these medium carbon steel output gears when performing center differential maintenance or upgrading to metal components; always check that they align with the #6780 center differential before fitting.

Do these need a break-in period?

A short run-in with light loads and checking mesh afterwards is recommended to ensure quiet operation and correct seating of the gears.

Will these rust in wet conditions?

Medium carbon steel can corrode if left wet; rinse and dry components after running in wet conditions and apply a light protective coating if needed.

Can I reuse existing bearings?

If the bearings are in good condition they can be reused, but inspect for wear during the rebuild and replace any that show play or roughness.

Is special grease required?

Use a compatible gear grease for metal-on-metal contact and apply sparingly on the mating surfaces to reduce noise and wear.

Copyright © 2008-2026 rcjaz.com.au All rights reserved