TRAXXAS JATO 4X4 VXL Aftermarket Rear Stub Carriers TJ022 7075 Alloy by GPM  [TJ022]

TRAXXAS JATO 4X4 VXL 7075 Alloy Rear Stub AXLE Carriers With Oversize Bearing - GPM TJ022
Price:
AUD$36.05
Brand:
GPM
Model:
TJ022
GTIN:
4894538401219
Condition:
Brand New
Write a review
alt="TRAXXAS JATO 4X4 VXL 7075 Alloy Rear Stub AXLE Carriers With Oversize Bearing - GPM TJ022" title="TRAXXAS JATO 4X4 VXL 7075 Alloy Rear Stub AXLE Carriers With Oversize Bearing - GPM TJ022"
alt="TRAXXAS JATO 4X4 VXL 7075 Alloy Rear Stub AXLE Carriers With Oversize Bearing - GPM TJ022" title="TRAXXAS JATO 4X4 VXL 7075 Alloy Rear Stub AXLE Carriers With Oversize Bearing - GPM TJ022"
alt="TRAXXAS JATO 4X4 VXL 7075 Alloy Rear Stub AXLE Carriers With Oversize Bearing - GPM TJ022" title="TRAXXAS JATO 4X4 VXL 7075 Alloy Rear Stub AXLE Carriers With Oversize Bearing - GPM TJ022"
alt="TRAXXAS JATO 4X4 VXL 7075 Alloy Rear Stub AXLE Carriers With Oversize Bearing - GPM TJ022" title="TRAXXAS JATO 4X4 VXL 7075 Alloy Rear Stub AXLE Carriers With Oversize Bearing - GPM TJ022"
alt="TRAXXAS JATO 4X4 VXL 7075 Alloy Rear Stub AXLE Carriers With Oversize Bearing - GPM TJ022" title="TRAXXAS JATO 4X4 VXL 7075 Alloy Rear Stub AXLE Carriers With Oversize Bearing - GPM TJ022"
alt="TRAXXAS JATO 4X4 VXL 7075 Alloy Rear Stub AXLE Carriers With Oversize Bearing - GPM TJ022" title="TRAXXAS JATO 4X4 VXL 7075 Alloy Rear Stub AXLE Carriers With Oversize Bearing - GPM TJ022"
alt="TRAXXAS JATO 4X4 VXL 7075 Alloy Rear Stub AXLE Carriers With Oversize Bearing - GPM TJ022" title="TRAXXAS JATO 4X4 VXL 7075 Alloy Rear Stub AXLE Carriers With Oversize Bearing - GPM TJ022"

Fitment overview and notes

TJ022 rear stub axle carriers are an aftermarket upgrade intended for TRAXXAS JATO 4X4 VXL vehicles using the 9080-series kit. Constructed from 7075 alloy and fitted with larger bearings, the carriers stabilise the CVD and running bearings at the rear stub axle for firmer handling under load.

Included bearing sizes are inner 12x21x5 and outer 6x13x4, which increase bearing contact area compared with the original 12x18x4 and 6x12x4 units. The kit arrives pre-assembled to simplify installation and replaces the stock inner and outer bearings to reduce end-play.

Supplier guidance notes that accessories come pre-assembled and that thread-lock should be used on suitable fasteners to prevent loosening during typical RC use. Ensure the vehicle has the 9080 upgrade components installed before attempting to fit these carriers.

Packing includes

  • Rear Stub Axle Carriers - 2pcs
  • Bearing 12x21x5 (inner) - 2pcs
  • Bearing 6x13x4 (outside) - 2pcs
  • Pins - 2pcs
  • 3.0 Lock nut - 2pcs

Original Name / Part No:

9050

Compatible Models

  • TRAXXAS 1/8 JATO 4X4 VXL BRUSHLESS-90386-4
  • TRAXXAS 1/8 JATO 4X4 BRUSHLESS-90154-4
  • TRAXXAS 1/10 BIGFOOT 4X4 Brushless Officially Licensed Replica-67134-4
  • TRAXXAS 1/10 4WD FORD F-150 RAPTOR R TRUCK-101076-4
  • TRAXXAS 1/10 Rustler 4X4 Brushless-67164-4
  • TRAXXAS 1/10 Rustler 4X4 VXL-67376-4
  • TRAXXAS 1/10 Slash 4X4 Brushless-68154-4
  • TRAXXAS 1/10 Slash 4X4 VXL EHD-68386-4
  • TRAXXAS 1/10 Stampede 4X4 Brushless-67154-4
  • TRAXXAS 1/10 Stampede 4X4 VXL-90376-4
  • TRAXXAS 1/10 Ford Fiesta ST Rally-74276-4
  • TRAXXAS 1/10 Ford Fiesta ST Rally Brushless-74154-4
  • TRAXXAS 1/10 Ford Fiesta ST Rally-74276-4
  • TRAXXAS 1/10 Rustler 4X4 Brushless-67164-4
  • For use with #9080 upgrade kit TRAXXAS 1/10 RUSTLER 4X4 VXL-67076-4
  • TRAXXAS 1/10 4WD HOSS 4X4 VXL 3S-90076-4
  • TRAXXAS 1/10 Rustler 4X4-67064-61
  • TRAXXAS 1/10 Slash 4X4 VXL-68086-4
  • TRAXXAS 1/10 Slash 4X4-68054-61

TJ022 is a specialist aftermarket option for vehicles running the 9080 upgrade, offering 7075 alloy durability and larger bearings to tighten stub axle tolerances; confirm kit presence and secure hardware with thread-lock when fitting.

Do these carriers require the 9080 conversion?

Yes. These carriers are designed for the 9080-series upgrade components and are not compatible with standard suspension pieces.

How do the new bearings affect driveline feel?

Larger bearings reduce axial play and create a firmer mount for the CVD, which can translate to more predictable rear-end behaviour under acceleration and cornering.

Will I need to press bearings into place?

The bearings are supplied pre-installed in the carriers; check clearances during trial fitting and use gentle methods if any seating is required.

What torque or thread-lock guidance is recommended?

Apply thread-lock to fasteners that see rotational loads and confirm torque against your vehicle's recommended values to keep the assembly secure.

Copyright © 2008-2026 rcjaz.com.au All rights reserved