TRAXXAS Latrax Rally 1/18 Upgrade 23mm Steel CVD Shaft SLTX223 by GPM  [SLTX223]

Steel 23mm CVD for Latrax Rally 1/18

SLTX223 is a 23mm steel front and rear CVD made as an aftermarket replacement for TRAXXAS Latrax Rally 1/18 vehicles. It swaps in for the original polymer drives to provide a tougher drivetrain link while maintaining the original layout.

The shaft transfers drive from the gearbox outputs to the wheel hubs and is installed using the same basic steps as other small-scale CVD changes: remove the existing shaft, inspect mating surfaces at the hub and gearbox, fit the steel CVD and secure with the stock hardware. Be sure to check nearby 走珠軸承 and hub hexes for wear while the unit is apart.

As the geometry stays the same as the stock component, alignment and handling characteristics remain unchanged; the steel option is chosen mainly for better wear resistance versus plastic when vehicles are used frequently on abrasive or rough surfaces.