TRAXXAS MAXX 12mm Brass Hex Adapter Upgrade TRX4010X/12M by GPM  [TRX4010X/12M]

12mm Brass Wheel Hex Upgrade for TRAXXAS MAXX

This brass hex adapter set is made for TRAXXAS MAXX wheel hubs and delivers a robust, heavier adapter to improve wheel sit and track width. The increase to a 12mm hex profile helps seat wheels more securely while avoiding interference with the rest of the drivetrain when properly installed.

The package contains all items required to replace the factory hexes and perform a direct swap as an aftermarket tuning step.

• Hex Adapter - 4 pcs
• Stainless Steel Screw Shaft M4x2.5x11.8 - 4 pcs
• Shims 5mm - 4 pcs
• 5mm Metal Washer - 4 pcs
• Stainless Steel Hex Socket Screw 11mm - 4 pcs

Fitment typically involves removing the original hex, positioning the brass adapter on the hub, and locking it down with the supplied screws and washers. Use the shims to set the desired offset. The brass adds weight (approximately 7g per adapter as provided by the source) and the wider flange reduces visible wheel gap and marginally increases track width, which can influence handling on off-road surfaces. The adapter thickness is 12mm, recorded as 7mm thicker than the original component.