TRAXXAS MAXX Dual-Position Front Steering Blocks TXMS021N by GPM  [TXMS021N]

TRAXXAS MAXX MONSTER TRUCK Aluminum 7075-T6 Front Steering Blocks - GPM TXMS021N
Price:
AUD$51.37
Brand:
GPM
Model:
TXMS021N
GTIN:
4894538372571
Condition:
Brand New
Write a review
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075-T6 Front Steering Blocks - GPM TXMS021N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075-T6 Front Steering Blocks - GPM TXMS021N"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075-T6 Front Steering Blocks - GPM TXMS021N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075-T6 Front Steering Blocks - GPM TXMS021N"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075-T6 Front Steering Blocks - GPM TXMS021N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075-T6 Front Steering Blocks - GPM TXMS021N"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075-T6 Front Steering Blocks - GPM TXMS021N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075-T6 Front Steering Blocks - GPM TXMS021N"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075-T6 Front Steering Blocks - GPM TXMS021N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075-T6 Front Steering Blocks - GPM TXMS021N"

Metal front knuckles for TRAXXAS MAXX tuning

These aluminium front steering blocks are machined from 7075-T6 aluminium to provide a stronger steering knuckle replacement compared with stock plastic parts. The design keeps factory mounting locations while giving a neat, modern profile.

With two tie-rod mounting holes, the steering link can be fitted in alternate positions to change the tie-rod angle and let you tune steering feel and roll behaviour on the model. This is intended for RC setup adjustments only.

Installation notes: the set includes the knuckle arms and matching stainless steel screws for front mounting, replacing the factory front knuckles and reusing the existing steering linkage pattern. Check screw torque and surrounding clearances during installation to avoid interference.

Packing includes

  • Kncukle arm - 2pcs
  • Stainless steel round head screw 3x16 - 2pcs

Original Name / Part No:

8937

Compatible Models

  • TRAXXAS-1/10 4WD MAXX MONSTER TRUCK -89076-4
  • TRAXXAS-1/10 4WD MAXX W/WIDE MAXX MONSTER TRUCK-89086-4

Fit these aluminium steering blocks when you want a tougher front knuckle and the ability to tweak tie-rod geometry on TRAXXAS MAXX 1/10 models; verify fitment before extended running.

Can I use the stock steering linkage with these blocks?

Yes, the blocks are designed to work with the existing steering linkage pattern; install using the supplied stainless screws and confirm alignment.

Does changing tie-rod position require other setup changes?

You may need to recheck toe and steering end points after moving the tie-rod to maintain the desired handling balance and avoid unwanted toe-in or out.

Are these parts corrosion resistant?

The components are aluminium with stainless steel fasteners provided; keep fasteners clean and inspect periodically for wear or corrosion in harsh conditions.

Recommended testing after install?

Perform a slow-speed range test and visual inspection of steering travel to ensure nothing binds and the servo centres correctly before normal running.

Copyright © 2008-2026 rcjaz.com.au All rights reserved