TRAXXAS MAXX Front C-Hubs Upgrade 7075 Aluminium - TXMS019N by GPM  [TXMS019N]

TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N
Price:
AUD$49.95
Brand:
GPM
Model:
TXMS019N
GTIN:
4894538378429
Condition:
Brand New
Write a review
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N"
alt="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N" title="TRAXXAS MAXX MONSTER TRUCK Aluminum 7075 Front C-Hubs - GPM TXMS019N"

7075 aluminium C-hubs for stronger front end

Aftermarket replacement front C-hubs made to mount on the TRAXXAS 1/10 MAXX front knuckles. Fabricated from 7075 aluminium to offer a combination of rigidity and reduced weight that benefits handling and tuning work.

Delrin collars are inserted into the hub bores to remove unwanted play at the king pin and cut friction. The set includes stainless steel king pins to help prevent rust and maintain smooth rotation across rough or damp tracks.

When fitted these hubs stabilise knuckle articulation so steering inputs track more consistently to the tyre, assisting setup of caster, toe and Ackermann for improved handling balance.

Packing includes

  • Front c-hubs - 2pcs
  • King pin - 4pcs

Original Name / Part No:

Part Location:Front c-hubsProduct major function & usage:Stabilize knuckle arms in order to rotate smoothly.

Compatible Models

  • TRAXXAS-1/10 4WD MAXX MONSTER TRUCK -89076-4
  • TRAXXAS-1/10 4WD MAXX W/WIDE MAXX MONSTER TRUCK-89086-4

Direct fit to the listed TRAXXAS MAXX front knuckles; fit with the supplied king pins and check for any interference with shock bodies or steering links prior to final tightening.

Do these hubs increase front end stiffness?

They use 7075 aluminium which is stiffer than common plastics, so expect a firmer front end response under load.

Is special installation hardware required?

No additional hardware is required; the package includes the king pins needed for installation.

Will these hubs affect tyre wear?

By stabilising the knuckle, they can help maintain more consistent alignment which may reduce uneven tyre wear when properly set up.

Any service advice?

Inspect the Delrin collars and king pins during routine service intervals and replace pins if any pitting or bending is observed.

Copyright © 2008-2026 rcjaz.com.au All rights reserved