TRAXXAS MAXX Front/Rear 6061-T6 Aluminium Lower Arms TXMW055F/R by GPM  [TXMW055F/R]

6061-T6 aluminium lower arms for TRAXXAS MAXX

This 14pcs aluminium lower arm assembly is made for the 1/10 TRAXXAS MAXX and Wide MAXX monster trucks and functions as an aftermarket replacement for the front and rear lower arms. The kit uses 6061-T6 aluminium for the arm bodies and includes the stainless pins, screws, washers and white Delrin 4mm shims required to fit the arms to C-hubs and suspension mounts.

Fitment and setup details: Delrin collars are fitted to reduce pivot slop and the supplied shims compensate for the wider rear gap when installing the rear arms. The pin-and-small-screw fixing method secures the arms without relying on extended thread engagement, and several damper-position holes give you options to tweak damper angle for ride height and rebound control.

All necessary basic mounting hardware is included; assemble using the supplied stainless pins and 3x18 and 3x8 screws and check component clearances before completing installation.

Fit this aluminium lower arm set when replacing worn plastics to restore tight pivots and preserve suspension tuning range on TRAXXAS MAXX builds.