TRAXXAS MAXX Hollow Stainless Skid Plates Bolt-On Protection TXMSZSP1B by GPM  [TXMSZSP1B]

TRAXXAS MAXX MONSTER TRUCK Stainless Steel Skid Plates For Front, Center, Rear Chassis (Hollow Version) - 36pc set - GPM TXMSZSP1B
Price:
AUD$63.14
Brand:
GPM
Model:
TXMSZSP1B
GTIN:
4894538329940
Condition:
Brand New
1 Reviews
Write a review
alt="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Skid Plates For Front, Center, Rear Chassis (Hollow Version) - 36pc set - GPM TXMSZSP1B" title="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Skid Plates For Front, Center, Rear Chassis (Hollow Version) - 36pc set - GPM TXMSZSP1B"
alt="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Skid Plates For Front, Center, Rear Chassis (Hollow Version) - 36pc set - GPM TXMSZSP1B" title="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Skid Plates For Front, Center, Rear Chassis (Hollow Version) - 36pc set - GPM TXMSZSP1B"
alt="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Skid Plates For Front, Center, Rear Chassis (Hollow Version) - 36pc set - GPM TXMSZSP1B" title="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Skid Plates For Front, Center, Rear Chassis (Hollow Version) - 36pc set - GPM TXMSZSP1B"
alt="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Skid Plates For Front, Center, Rear Chassis (Hollow Version) - 36pc set - GPM TXMSZSP1B" title="TRAXXAS MAXX MONSTER TRUCK Stainless Steel Skid Plates For Front, Center, Rear Chassis (Hollow Version) - 36pc set - GPM TXMSZSP1B"

Hollow stainless protection panels for TRAXXAS MAXX

This hollow stainless skid plate set fits the TRAXXAS MAXX monster truck chassis and covers front, centre and rear regions to reduce abrasion and shield underside parts during aggressive off-road use. The design keeps contact areas slim while guarding high-wear points.

Manufacture uses polished stainless steel and routine quality checks. Panel thicknesses vary to balance protection with weight: front panels 2.5mm, rear panels 1.8mm, side and middle panels 0.7mm. The kit is supplied as a 36pcs set intended to replace original plastic skids where mounting holes align.

The retrofit installation is straightforward: remove the original screws at factory mount points, locate the plates, apply the included shims to fine-tune gaps and fasten using the extended-length gold screws provided. No custom fabrication is normally necessary for matching TRAXXAS MAXX chassis positions.

These plates add robust underbody protection and a small change in mass distribution, so check suspension settings and ride height after fitting to keep handling consistent.

Specifications

  • Item: Stainless steel skid plate set, hollow version, 36pcs set, includes multi-thickness panels (front 2.5mm, rear 1.8mm, side/middle 0.7mm) and fitting hardware.
  • Material: Stainless steel, hand-polished finish.
  • Model Number: TXMSZSP1B
  • Compatibility: TRAXXAS MAXX MONSTER TRUCK chassis (front, center, rear mounting locations).

An effective and tidy upgrade for TRAXXAS MAXX owners who want stronger under-chassis protection without complicated fitting procedures.

This item is compatible with

 

Product Reviews
1 Reviews
rating
Fantastic selection of parts and super fast shipping.

Do these plates require spacers for all MAXX models?

The kit includes 1mm, 2mm and 3mm shims to adjust for variations in mounting posts; use the shims where needed to prevent stress on fasteners.

What tools will I need to fit the kit?

Standard hex drivers that match your truck screws will be sufficient to remove originals and fit the supplied hardware; no specialist tools are required.

Will the finish scratch easily?

Hand-polished stainless has good surface durability but can mark under heavy scraping; regular inspection and cleaning will keep the finish looking better for longer.

Does the kit change gear or motor clearance?

The plates are designed to sit under the chassis bodywork and should not affect gear or motor clearance when mounted at the factory points; always verify clearance after fitting.

Copyright © 2008-2026 rcjaz.com.au All rights reserved