TRAXXAS MAXX Wide Arm Upgrade with Adjustable CVDs TXMS100N by GPM  [TXMS100N]

Widening arms and CVD reinforcement assembly

The TXMS100N kit from GPM is a widening and strengthening package for TRAXXAS 1/10 4WD MAXX monster trucks. It supplies both front and rear upper and lower arms, adjustable CVD shafts, aluminium hex adapters and wheel locks plus an adjustable stainless steel steering tie rod to widen the stance and correct suspension geometry. The kit moves the wheel track 20mm per side to increase stability while keeping driveline durability by upgrading CVD joints and axle diameter.

Notable construction points: primary aluminium parts use 6061 T6 alloy to balance mass and tensile strength, delrin collars and 4mm delrin shims are included to help remove play, pins with small retaining screws are used to reduce thread wear, and multiple damper mounting holes permit suspension tuning. Hardened steel joint components are combined with alloy bodies, axle size is increased from 6mm to 8mm to withstand higher loads, and bearings matching the thicker axles are provided.

For those after a wider MAXX setup, TXMS100N supplies alloy arms, stronger CVDs and the required hardware to widen the track and allow suspension geometry adjustments for better on-track behaviour.