TRAXXAS Rear CVD Drive Shaft Harden Steel #45 12mmx6mm Hex SSLA1277RHST 8pcs by GPM  [SSLA1277RHST]

TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST
Price:
AUD$47.19
Brand:
GPM
Model:
SSLA1277RHST
GTIN:
4894538322477
Condition:
Brand New
Write a review
alt="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST" title="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST"
alt="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST" title="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST"
alt="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST" title="TRAXXAS 1/10 Slash 4x4 Harden Steel #45 Rear CVD Drive Shaft With 12mmx6mm Wheel Hex - 8pc set - GPM SSLA1277RHST"

Rear CVD summary

The GPM SSLA1277RHST 8-piece rear CVD drive shaft kit is an aftermarket replacement specifically made for the TRAXXAS 1/10 Slash 4x4 rear axle. Manufactured from Harden Steel #45, the CVD layout preserves smooth rotational behaviour while the retracting sections allow normal suspension rocker travel and clearance. A spring steel wheel hex stabiliser is included to reduce slack under power and improve traction response for recreational and club-level use.

Installation notes: place the assembly at the rear axle position and secure using the supplied screw pins and O-rings. A basic teardown of the rear differential and axle housing is necessary; inspect hex retention and pin seating before operating the vehicle.

Packing includes

  • Item - 8pcs

Original Name / Part No:

6850X+6828X+6854X

Specifications

  • Item: TRAXXAS 1/10 Slash 4x4 Rear CVD Drive Shaft, 8 pcs set
  • Material: Harden Steel #45
  • Model Number: SSLA1277RHST
  • Compatibility: TRAXXAS 1/10 Slash 4x4 (rear axle)

This SSLA1277RHST steel upgrade focuses on rear drivetrain durability and reduced play for 1/10 Slash 4x4 setups; confirm fitment and torque settings during assembly for reliable performance.

This item is compatible with

  • TRAXXAS Slash 4X4

Can these handle higher power setups?

Harden Steel #45 increases strength over stock parts, making these suitable for moderately uprated electric setups, though overall drivetrain limits should be considered.

Do I need to change my diff oil?

Refreshing diff oil during the swap is recommended to ensure proper lubrication and to remove any metal filings from installation work.

How do I check hex retention?

After assembly, secure the wheel hex with the stabiliser fitted and gently pull on the wheel to confirm there is no excessive movement; tighten fasteners as required.

Are replacement parts available?

Individual hardware like screw pins and O-rings can be sourced from hobby parts suppliers; keep the kit parts for reference when ordering spares.

Copyright © 2008-2026 rcjaz.com.au All rights reserved