TRAXXAS Revo Front and Rear 85mm Adjustable Dampers TRV085N/2 by GPM  [TRV085N/2]

TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2
Price:
AUD$74.28
Brand:
GPM
Model:
TRV085N/2
GTIN:
4894538207354
Condition:
Brand New
Write a review
alt="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2" title="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2"
alt="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2" title="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2"
alt="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2" title="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2"
alt="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2" title="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2"
alt="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2" title="TRAXXAS REVO Alloy Front/Rear Adjustable Spring Dampers (85mm)with Alloy Ball Ends - 2prs set - GPM TRV085N/2"

Revo spring damper upgrade

The TRV085N/2 set supplies two pairs of 85mm adjustable spring dampers intended for TRAXXAS Revo model chassis. Constructed from alloy, each damper includes alloy ball ends to replace weaker plastic fittings and give a more reliable mounting point.

These are for scale RC application only and not for full-size vehicles. They install into the standard shock positions on Revo-style chassis using the original shock towers and lower mounts. You can reuse stock springs and top caps unless you choose aftermarket springs; typical hobby tools suffice for installation.

These adjustable spring dampers let you tweak preload and basic ride height and deliver a firmer ball-end connection compared with polymer originals. For more precise handling changes, combine them with different spring rates or shock cartridges from compatible suppliers.

Specifications

  • Item: Alloy front/rear adjustable spring dampers 85mm with alloy ball ends, 2prs set
  • Material: Alloy
  • Model Number: TRV085N/2
  • Compatibility: TRAXXAS Revo

Use these dampers to replace damaged plastic shock ends or to add incremental durability and tuning capability to TRAXXAS Revo models while keeping stock mounting points.

This item is compatible with

  • Traxxas REVO
  • TRAXXAS E-REVO

Will these work with my existing Revo mounts?

They are made for standard Revo shock mounts and an 85mm length; confirm your truck uses the same shock spacing before fitting.

Should I change springs when fitting these?

Not required. Keep stock springs if they suit your setup, or swap to aftermarket springs of a compatible size to adjust ride height and spring rate.

Do they require special maintenance?

Maintain them like standard shocks: check ball-end wear, inspect seals if using oil-filled cartridges, and replace springs or hardware as needed for consistent performance.

How do these affect tuning options?

They give a more secure mount and let you change spring preload to tune ride height and basic response; for damping changes use suitable cartridges and oil weights.

Copyright © 2008-2026 rcjaz.com.au All rights reserved