TRAXXAS Revo/Revo 3.3 Front Lower Arm Right Side Alloy Sandwich TRV055RS by GPM  [TRV055RS]

TRAXXAS Revo /Revo 3.3 Alloy Front Lower Arm (Sandwich Design With Screws+Pins)-1pc set (For Right Side) - GPM TRV055RS
Price:
AUD$19.69
Brand:
GPM
Model:
TRV055RS
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Right side front lower arm for Revo 3.3

This replacement front lower arm is intended for TRAXXAS Revo and Revo 3.3 platforms and is supplied as a single right-side unit. The alloy sandwich design comes with the required screws and pins and functions as a direct spare for maintenance and suspension tuning tasks.

Installation reminders:

  • Confirm the part is for the right side of the chassis before fitment, as this is the right-side lower arm for Revo models.
  • Remove the original arm and compare mounting pitches and hole alignment prior to final tightening.
  • Check the supplied screws and pins and consider thread locker for metal-fastened joints during high-impact running.

Setup and tuning guidance:

  • The alloy arm preserves reliable geometry for adjusting front toe and camber during setup sessions.
  • Verify clearance with steering links and the servo arm after installation and ensure full suspension travel under a loaded condition.
  • Keep this arm as a track-side spare for quick repairs or when testing different shock or anti-roll setups.
Compare your stock arm's pivot spacing and mounting points to the replacement; while designed for TRAXXAS Revo and Revo 3.3, confirmation avoids fit issues.
The listing shows screws and pins included with the alloy sandwich arm; confirm sizes on arrival and swap with stock hardware if preferred.
After fitting, check steering movement for binding and confirm suspension travel and fastener torque; recheck after a short run.

Copyright © 2008-2026 rcjaz.com.au All rights reserved