TRAXXAS Rustler VXL Adjustable Turnbuckles 3pc Spring Steel RUS160/ST by GPM  [RUS160/ST]

TRAXXAS 1/10 Rustler VXL Spring Steel Turnbuckles With Alloy Ball Ends - 3pcs set - GPM RUS160/ST
Price:
AUD$24.19
Brand:
GPM
Model:
RUS160/ST
GTIN:
4894538138610
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="TRAXXAS 1/10 Rustler VXL Spring Steel Turnbuckles With Alloy Ball Ends - 3pcs set - GPM RUS160/ST" title="TRAXXAS 1/10 Rustler VXL Spring Steel Turnbuckles With Alloy Ball Ends - 3pcs set - GPM RUS160/ST"
alt="TRAXXAS 1/10 Rustler VXL Spring Steel Turnbuckles With Alloy Ball Ends - 3pcs set - GPM RUS160/ST" title="TRAXXAS 1/10 Rustler VXL Spring Steel Turnbuckles With Alloy Ball Ends - 3pcs set - GPM RUS160/ST"
alt="TRAXXAS 1/10 Rustler VXL Spring Steel Turnbuckles With Alloy Ball Ends - 3pcs set - GPM RUS160/ST" title="TRAXXAS 1/10 Rustler VXL Spring Steel Turnbuckles With Alloy Ball Ends - 3pcs set - GPM RUS160/ST"
alt="TRAXXAS 1/10 Rustler VXL Spring Steel Turnbuckles With Alloy Ball Ends - 3pcs set - GPM RUS160/ST" title="TRAXXAS 1/10 Rustler VXL Spring Steel Turnbuckles With Alloy Ball Ends - 3pcs set - GPM RUS160/ST"

Adjustable turnbuckle kit for Rustler VXL

A three-piece turnbuckle linkage kit tailored for the TRAXXAS 1/10 Rustler VXL chassis, pairing spring steel rods with alloy ball ends for compact joints and threaded length control to refine steering and toe.

These links are intended for chassis trimming and setup, enabling incremental adjustments without disassembling servo mounts. Alloy ball ends give a secure seating for standard Rustler ball studs and help limit wear at the pivot.

Fit by removing the existing linkage, hand-starting the threads to confirm pitch, and turning the turnbuckle body with a spanner while the vehicle is on its wheels to achieve neutral geometry. Inspect thread engagement and clearances before locking the link.

Specifications

  • Item: Turnbuckle set - 3 pcs
  • Material: Spring steel turnbuckles with alloy ball ends
  • Model Number: RUS160/ST
  • Compatibility: TRAXXAS 1/10 Rustler VXL

A straightforward aftermarket choice for hobbyists wanting reliable threaded links for setup and everyday tuning on TRAXXAS Rustler VXL models.

This item is compatible with

  • TRAXXAS Rustler VXL

Do these replace the stock links directly?

They are made to fit Rustler VXL-style link points, but check thread size and overall length against the stock parts before swapping.

Best method to set toe angle?

Place the model on its wheels, adjust each turnbuckle in small increments until the desired toe is achieved, then secure the bodies to maintain the setting.

Will these improve durability?

The spring steel rods offer good fatigue resistance and the alloy ball ends reduce contact wear compared with softer materials, but regular inspection is still recommended.

Any tips for long term maintenance?

Clean threads after runs, check ball end seating, and replace any components showing burrs or excessive play to keep steering precise.

Copyright © 2008-2026 rcjaz.com.au All rights reserved