TRAXXAS Slash 4X4 Low-CG Front C Hub 7075 Alloy SLA019N by GPM  [SLA019N]

TRAXXAS SLASH 4X4 LOW-CG 7075 Alloy Front C Hub - GPM SLA019N
Price:
AUD$40.23
Brand:
GPM
Model:
SLA019N
GTIN:
4894538387933
Condition:
Brand New
Write a review
alt="TRAXXAS SLASH 4X4 LOW-CG 7075 Alloy Front C Hub - GPM SLA019N" title="TRAXXAS SLASH 4X4 LOW-CG 7075 Alloy Front C Hub - GPM SLA019N"
alt="TRAXXAS SLASH 4X4 LOW-CG 7075 Alloy Front C Hub - GPM SLA019N" title="TRAXXAS SLASH 4X4 LOW-CG 7075 Alloy Front C Hub - GPM SLA019N"
alt="TRAXXAS SLASH 4X4 LOW-CG 7075 Alloy Front C Hub - GPM SLA019N" title="TRAXXAS SLASH 4X4 LOW-CG 7075 Alloy Front C Hub - GPM SLA019N"
alt="TRAXXAS SLASH 4X4 LOW-CG 7075 Alloy Front C Hub - GPM SLA019N" title="TRAXXAS SLASH 4X4 LOW-CG 7075 Alloy Front C Hub - GPM SLA019N"
alt="TRAXXAS SLASH 4X4 LOW-CG 7075 Alloy Front C Hub - GPM SLA019N" title="TRAXXAS SLASH 4X4 LOW-CG 7075 Alloy Front C Hub - GPM SLA019N"
alt="TRAXXAS SLASH 4X4 LOW-CG 7075 Alloy Front C Hub - GPM SLA019N" title="TRAXXAS SLASH 4X4 LOW-CG 7075 Alloy Front C Hub - GPM SLA019N"

7075 alloy front C hub for Slash 4X4

The SLA019N front C hub provides an RC-scale replacement option for TRAXXAS Slash 4X4 and various 1/10 4WD models. CNC-style machining in 7075 alloy shifts the knuckle mounting to a bearing seat rather than a plain hole, cutting slop and yielding firmer steering feedback. The array of upper tie rod holes allows roll centre and toe adjustments without altering other suspension components.

Fitment follows the stock front C-hub mounting and uses the supplied hardware for a straightforward swap. Proper bearing seating is essential for the bearing-mounted knuckle and apply medium-strength thread-lock to metal fasteners where recommended. This item is for hobby RC use only and is compatible with the models detailed below.

Packing includes

  • C-Hub - 1pcs
  • King Pin - 1pcs
  • Grade 12.9 black Round Head Screws 3x14 - 1pcs
  • Grade 12.9 black Round Head Screws 3x16 - 1pcs

Original Name / Part No:

6832

Compatible Models

  • TRAXXAS-SLASH 4X4 LOW-CG-68086-21
  • TRAXXAS 1/10 RUSTLER 4X4 VXL-67076-4
  • TRAXXAS 1/10 4WD HOSS 4X4 VXL 3S-90076-4
  • TRAXXAS 1/10 Ford Fiesta ST Rally-74064-4
  • TRAXXAS 1/10 Ford Fiesta ST Rally-74054-4
  • TRAXXAS 1/10 Rustler 4X4-67064-1
  • TRAXXAS 1/10 Rustler 4X4-67064-61
  • TRAXXAS 1/10 Slash 4X4 VXL-68086-4
  • TRAXXAS 1/10 Slash 4X4-68054-1
  • TRAXXAS 1/10 Slash 4X4-68054-61
  • TRAXXAS 1/10 Slash 4X4 VXL-68286-4
  • TRAXXAS 1/10 Stampede 4X4 VXL-67086-4
  • TRAXXAS 1/10 Rustler 4X4 Ultimate-67097-4
  • TRAXXAS 1/10 Slash 4X4 Ultimate-67097-4
  • TRAXXAS 1/10 Slash 4X4 Ultimate-68277-4

Use SLA019N to reduce knuckle play and sharpen steering; change upper tie rod positions to tune handling for tight tracks or loose terrain, and confirm correct bearing seating and screw locking after installation.

Is SLA019N suitable for weekend bashing?

Yes, the SLA019N is robust enough for regular hobby use. Its 7075 alloy construction improves durability over stock plastic hubs, but inspect bearings and hardware after heavy runs.

Can I use this with different knuckles?

The hub is designed to work with stock knuckle geometry that accepts a bearing-mounted knuckle. Confirm compatibility with your knuckle type and the list in the Compatible Models box.

Do I need to re-trim steering endpoints?

After installing a stiffer alloy hub, re-centre your servo endpoints and check steering throw to avoid binding and ensure neutral steering behaviour.

Any recommended maintenance?

Periodically check bearing tightness and mating surfaces for wear, and retorque the metal screws after the first few runs to ensure stable fitment.

Copyright © 2008-2026 rcjaz.com.au All rights reserved