TRAXXAS T-Maxx 100mm Damper Spring 1.5mm - TMX13100/SP4 by GPM  [TMX13100/SP4]

100mm damper spring - 1.5mm wire

This spring set is made for the TRAXXAS 1/10 T-Maxx platform and fits 100mm long shock bodies. Supplied as 2 pcs, it adjusts the damper's initial stiffness and rebound behaviour without changing internal shock components.

Use these springs to tune handling in a repeatable way: stiffer coils reduce dive and firm up landings while softer coils aid traction over rough ground. Tuning is best done gradually, testing after each change to see how the car responds.

Installation is common on T-Maxx dampers: remove the shock, compress the cap, swap springs and reassemble. Pair spring swaps with oil viscosity and preload settings to refine the damping curve. Check that the spring is seated correctly on the retainer and confirm full travel clearance once fitted.