TRAXXAS TRX-4 HD 12mm Hex Wheel Adapter (5mm Thick) - JR-TRX417-5MM by Jazrider  [JR-TRX417-5MM]

Traxxas TRX-4 HD Brass 12mm Wheel Hex Hubs Adapter (5mm thick)
Price:
AUD$9.06
Brand:
JAZRIDER
Model:
JR-TRX417-5MM
Condition:
Brand New
Available in shop
Write a review

5mm Thick Brass Wheel Hex for TRX-4 HD

This adapter is an RC-scale wheel hex insert created for TRAXXAS TRX-4 HD use and listed as JR-TRX417-5MM. The component is a brass 12mm hex with a 5mm face thickness designed to couple TRX-4 HD wheel hex hubs to typical scale crawler wheels.

Fitment is direct: the adapter fits over the 12mm hex on the hub and locates the wheel at the required mounting plane. It is suitable as a replacement hex insert or as a spare hop-up where a metal interface is preferred to reduce wear and give repeatable positioning.

In tuning applications this part helps with incremental offset adjustments and provides a reliable metal bearing surface where wheel rotation meets the hub. Intended only for compatible TRX-4 HD assemblies as an aftermarket upgrade.

How can this adapter affect vehicle handling?

Changing the wheel offset by 5mm may slightly alter scrub radius and track width, which can affect steering feel and roll characteristics; small changes can be beneficial for clearance or stance tuning.

Can I use this for axle spacer adjustments?

Yes. The 5mm thickness acts as a fixed spacer at the wheel mounting plane and is useful for correcting minor axle or hub alignment without altering other components.

Will the brass insert change wheel balancing?

Adding brass increases mass at the wheel mounting point, which can slightly affect static balance and rotational inertia; rebalance tyres if precise balance is required.

Copyright © 2008-2026 rcjaz.com.au All rights reserved