TRAXXAS TRX6 Brass Wheel Hex Adapters 23mm TRX6010X/23M by GPM  [TRX6010X/23M]

Brass 23mm wheel hex for TRX6 setups

This 30-piece brass wheel hex adapter kit is aimed at TRX6 MERCEDES-BENZ scale builds where a heavier, wider hub is wanted to adjust track width and tighten wheel fitment. The adapters are designed for RC-scale use and connect the wheel to the front CVD and rear drive shaft assemblies while increasing track to reduce lateral movement.

Each adapter is 23mm across and the kit includes the necessary fasteners and 5mm shims to adapt common TRX6 wheel hubs. The brass build adds durability and a measurable weight increase (listed at 17g apiece in supplied notes), which helps drop the centre of gravity and stabilise rolling on uneven terrain.

Fitment summary: swap out the stock hex for the brass adapter, secure wheels with the provided shaft and hex socket screws, and use the included shims or washers as needed to set the correct offset. The larger hex face reduces play between wheel and hub for a tighter assembly without axle modification.

For hobbyists tuning track and wheel offset on TRX6 Mercedes-Benz scale rigs, this brass 23mm hex adapter set provides a practical, robust upgrade that integrates cleanly with CVDs and drive shafts.