TRAXXAS UNLIMITED DESERT RACER 28T Hardened Steel Motor Gear #45 UDR028TS by GPM  [UDR028TS]

TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 28T - 2pc set - GPM UDR028TS
Price:
AUD$12.39
Brand:
GPM
Model:
UDR028TS
GTIN:
4894538327885
Condition:
Brand New
Write a review
alt="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 28T - 2pc set - GPM UDR028TS" title="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 28T - 2pc set - GPM UDR028TS"
alt="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 28T - 2pc set - GPM UDR028TS" title="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 28T - 2pc set - GPM UDR028TS"
alt="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 28T - 2pc set - GPM UDR028TS" title="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 28T - 2pc set - GPM UDR028TS"
alt="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 28T - 2pc set - GPM UDR028TS" title="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 28T - 2pc set - GPM UDR028TS"
alt="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 28T - 2pc set - GPM UDR028TS" title="TRAXXAS UNLIMITED DESERT RACER Harden Steel #45 Motor Gear 28T - 2pc set - GPM UDR028TS"

Heavy-duty motor pinion replacement

This motor pinion is intended for TRAXXAS UNLIMITED DESERT RACER style setups and sits in the motor pinion area. Fabricated in hardened steel #45, the 28T gear is chosen for improved wear resistance during aggressive off-road running and tuning.

Package contents are listed below using the manufacturer wording and quantities:

  • Motor Gear - 1pcs
  • 4x4 Set Screw - 1pcs

The supplied gear is 28T while the original reference is 127T. Installation requires aligning the pinion to the corresponding motor mount positioning hole, confirming correct gear mesh, and tightening the set screw to secure motor positioning for dependable performance.

Can I use this on stock UDR setups?

Yes, it is made for the motor pinion area of TRAXXAS UNLIMITED DESERT RACER layouts, but check the mount hole and shaft size to confirm fit.

How do I set the mesh correctly?

Set a small clearance between pinion and spur under load, rotate to check for binding, then lock the set screw and reverify after a test run.

Is the 4x4 set screw included?

Yes, the 4x4 set screw is supplied in the package and should be used to secure the pinion once alignment and mesh are correct.

Copyright © 2008-2026 rcjaz.com.au All rights reserved