TRAXXAS Unlimited Desert Racer Anti-Roll 3.4mm Stainless Sway Bar Set Front & Rear SUDR311FR by GPM  [SUDR311FR]

TRAXXAS UNLIMITED DESERT RACER Stainless Steel Front+Rear Sway Bars - 3pc set - GPM SUDR311FR
Price:
AUD$17.03
Brand:
GPM
Model:
SUDR311FR
GTIN:
4894538320824
Condition:
Brand New
Write a review
alt="TRAXXAS UNLIMITED DESERT RACER Stainless Steel Front+Rear Sway Bars - 3pc set - GPM SUDR311FR" title="TRAXXAS UNLIMITED DESERT RACER Stainless Steel Front+Rear Sway Bars - 3pc set - GPM SUDR311FR"
alt="TRAXXAS UNLIMITED DESERT RACER Stainless Steel Front+Rear Sway Bars - 3pc set - GPM SUDR311FR" title="TRAXXAS UNLIMITED DESERT RACER Stainless Steel Front+Rear Sway Bars - 3pc set - GPM SUDR311FR"
alt="TRAXXAS UNLIMITED DESERT RACER Stainless Steel Front+Rear Sway Bars - 3pc set - GPM SUDR311FR" title="TRAXXAS UNLIMITED DESERT RACER Stainless Steel Front+Rear Sway Bars - 3pc set - GPM SUDR311FR"

3.4mm anti-roll stainless sway bars for SUDR312FS/FRS

This aftermarket sway bar upgrade is built for the TRAXXAS Unlimited Desert Racer platform to firm up roll control at both axles. The thicker stainless steel rods alter roll rates while keeping the rest of the suspension unchanged.

Product specifics: bars are stainless steel with diameter increased from about 2mm to 3.4mm to raise torsional stiffness. The kit includes the reamer and adjustment hardware to aid installation. Contents are 2 pcs sway bar rods plus 1 pcs reamer for hole enlargement.

Fitting advice: use the supplied reamer to carefully open locating holes in the chassis or suspension mounts so the thicker rods install smoothly. Proceed in small steps and confirm that link angles are correct before final tightening to avoid binding.

Handling notes: increasing bar thickness raises roll stiffness for the fitted axle and will shift handling balance; use front or rear swaps as a tuning tool instead of only changing springs or shock settings.

Compatibility note: intended for SUDR312FS & SUDR312FRS only; verify chassis code prior to purchase.

Many installs will require the reamer because the 3.4mm rod is larger than stock; test fit first and ream only as much as needed.
Yes, stiffer sway bars reduce body roll and can change weight transfer, so corner entry and mid-corner balance will feel different.
Check with your parts supplier for compatible end links if you need replacements; standard link sets for the platform are typically suitable.

Copyright © 2008-2026 rcjaz.com.au All rights reserved