TRF104 Rear Wing Mount Upgrade Graphite 2.0 TAMIYA O-TCPF07  [FP-O-TCPF07]

Aftermarket Rear Wing Mount for TRF104

The Factory Pro O-TCPF07 rear wing mount is an aftermarket accessory made for the TAMIYA TRF104 chassis, intended to replace the standard wing mounting point. Its graphite 2.0 construction increases stiffness at the mount compared with common plastic versions while keeping mass low.

Compatibility targets the TRF104 platform specifically; correct fit depends on the chassis original wing post layout and hardware. The mount keeps the same mounting footprint as the stock item so most TRF104 kits will accept it without modification.

Fitting the unit is simple for a competent hobbyist: uninstall the factory mount, align the Factory Pro piece to the TRF104 wing posts, then refit your original fasteners. After installation, inspect wing lateral alignment and ensure no contact occurs with adjacent panels during suspension movement.

On track, the stiffer graphite mount cuts unwanted movement at the wing root so the wing angle remains more constant under aerodynamic load. That steadier platform makes fine tuning of rear downforce and balance easier to achieve.